I have the following three Excel (2010) formulas which perform exactly what I want them to:
=IF([NoData]Sheet1!C4=ISBLANK(TRUE)," ",[NoData]Sheet1!A4)
=IF([NoData]Sheet1!C4=ISBLANK(TRUE)," ",[NoData]Sheet1!C4)
=IF([NoData]Sheet1!C4=ISBLANK(TRUE)," ",[NoData]Sheet1!K4)
I want these three formulas to run through data in several worksheets contained within a given workbook. The cells that they will operate on will remain the same for each worksheet.
How can I run these three formulas through 11 or 12 different worksheets within the given workbook?
You could use VBA to achieve this, but given the state of your original formulae I wouldn't suggest taking that route.
Use the indirect function to vary the name of the sheet that your are putting into your formula:
=IF(ISBLANK(INDIRECT(CONCATENATE("[NoData]Sheet",A1,"!A1")))," ",INDIRECT(CONCATENATE("[NoData]Sheet",A1,"!K4")))
In cell A1 on the sheet for the formula above, put the sheet number that you want the formula to target.
I will reiterate though, ISBLANK(TRUE) always resolves to FALSE, so in your formula you are checking if the value in C4 is FALSE, not if it is blank.
Related
So i am currently using Visual Studio to create a application that takes info out of an excel sheet and then does some calculations on the data and then pushes back to excel.
This bit i have managed to do but the bit i am struggling on is using a 'Parameters' sheet. I want to be able to enter a formula into a cell in one sheet of the workbook and then paste that formula into another sheet but to have it updating,e.g. as the cells go down the formula changes like it would in excel. I used a manual work around by hard coding the formula and then having variable as the row number, however i want to be able to just change the formula in the excel sheet and then when the code runs it applies to the rest.
Currently i have tried saving the cell value/text into a variable and then making the new cells equal that variable, however this then applies the same identical formula to the whole of the column(All required rows).
What i am currently trying to do is paste the variable into the top row and then copy and paste that cell down to the last one,
I have tried making the variable a formula but it evaluates the formula before it is equal to the variable and therefore just sets all the new cells to the formula answer, so i changed the cell to be text instead which then meant the formula did appear in the new cell however it was the identical formula for all cells.
The copy code works as below
bjExcel.cells(rown, colval) = param1
objExcel.cells(rown, colval).copy
This is working fine
But when i use the below the paste won't work
Do Until rown = 10
objExcel.cells(rown, colval).copy
rown = rown + 1
objExcel.cells(rown, colval).paste
Paste is not a recognized with the error:
System.MissingMemberException: 'Public member 'Paste' on type
'ApplicationClass' not found.'
Could be you need to use PasteSpecial instead?
https://learn.microsoft.com/en-us/office/vba/api/excel.range.pastespecial
Depends on what you're using to interop with excel.
shWorkSheet.Range("C7:C7").Copy()
shWorkSheet.Range("V7:V7").PasteSpecial(Excel.XlPasteType.xlPasteAll)
I'm try to write a macro that will auto update stock by taking the ammount used from one cell, subtracting it from a total in a different sheet.
Sheet view:
So in this instance - I want to subtract "kgs" which is cell range 'I17:I24' from what is "kgs available" which is held in the sheet "Malt" and updated from a VLOOKUP defined from the "Batch Code" in the Brew Sheet.
I'm guessing the code would probably have to VLOOKUP that batch code in the Malt sheet and subtract the "kgs" in the "Brew Sheet" sheet from the "kgs available" in the "Malt" sheet (Column L)
What also might contribute complications is if the cells in range E17:24, which contain the Batch Codes for the VLOOKUP have no values. Would that throw up errors, if though I may not need to use all of the cells in that range? (If that makes sense - sometimes, I may only need to use 1/2 of the 8 cells in the range)
Apologises in advance if my question is vague. My coding knowledge is very limited.
Thanks for you help.
you need to get the sum of KGs in range E17:24 where the batch code matched the batch code on the malt sheet
=sumif(Malt!$E$17:$E$24,L17,Malt!$I$17:$I$24)
Then all you need to do is subtract that from the available value in column I
=I17-sumif(Malt!$E$17:$E$24,L17,Malt!$I$17:$I$24)
Not sure if I have the columns correct.
I'm trying to apply a formula through VBA for a particular range. This is the code in my VBA editor:
Sheets("WBR45").Range("AE105").Formula = "=PERCENTILE.INC(TP!$A$3:$A$30:$B$3:$B$30:$C$3:$C$30:$E$3:$E$30,50%)*24"
And the below formula gets updated in the destination cell when this is run:
=PERCENTILE.INC(TP!$A$3:$A$30:$B$3:$B$30:$C$3:$C$30:$E$3:$E$30,50%)*24
But I get an error in the destination cell as #VALUE!.
And when I click on "Show Calculation steps", only this part of the formula is underlined :
TP!$A$3:$A$30:$B$3:$B$30
I have no idea what is wrong with this simple formula. Can someone please take a look
Honestly I have no clue about what you're doing with this, but this may fix it:
"=PERCENTILE.INC(TP!$A$3:$A$30:TP!$B$3:$B$30:TP!$C$3:$C$30:TP!$E$3:$E$30,50%)*24"
You appear to have three errors in your formula:
You are using : to separate ranges instead of ,
You are not specifying which sheet the second, third and fourth ranges refer to, therefore it is defaulting to the sheet on which the formula occurs (i.e. sheet "WBR45")
Multiple ranges will need to be enclosed within brackets (...) in order to be passed as a single range.
If you are trying to have your function operate on the range A3:C30 together with the range E3:E30 (i.e. A3:E30 but ignoring column D), with those ranges being on the "TP" worksheet, I believe that you need to change your formula to
Sheets("WBR45").Range("AE105").Formula = "=PERCENTILE.INC((TP!$A$3:$A$30,TP!$B$3:$B$30,TP!$C$3:$C$30,TP!$E$3:$E$30),50%)*24"
or, slightly simplified
Sheets("WBR45").Range("AE105").Formula = "=PERCENTILE.INC((TP!$A$3:$C$30,TP!$E$3:$E$30),50%)*24"
I have multiple sheets of data and I want to make it in one sheet (All of them are in the same workbook). Link to the excel file.
I tried to use Hlookup function in excel file, something like below:
=HLOOKUP("University",Sheet1!$A$1:$G$2, 2, FALSE).
But, since I have more than 100 sheets of data, I want to find a way to drag the function and auto generate the function below the 2nd row. I have tried to use indirect function by setting a reference column in front as below but cannot deal with it.
=HLOOKUP("University", 'INDIRECT(A3)'!$A$1:$G$2, 2, FALSE)
My next option is VB code. But, I am new to VB. Anybody can help on it?
Place your individual sheet names in column H of the Summary sheet and the row number in column I (as helper columns) and write this formula in cell A2 of the summary sheet.
=IFERROR(HLOOKUP(A$1,INDIRECT($H2&"!A1:G"&$I2),$I2,0),)
and drag to column F and down for as many sheet rows combos you have. I used 10 rows but you can obviously make it longer or shorter as neeed.
When you are done you can filter on 0 in column A and remove any lines with no data.
If your sheet names have spaces in them, you'll need to adjust the INDIRECT formula to this:
INDIRECT("'"&$H2&"'!A1:G"&$I2)
best way would be "defined names" + INDIRECT + HLOOKUP (or LOOKUP) like:
defined names
name: SList
formula: =MID(TRANSPOSE(GET.WORKBOOK(1))&T(NOW()),FIND("]",TRANSPOSE(GET.WORKBOOK(1))&T(NOW()))+1,255)
formula in cells: (this in A2 then simply autofill to G2 and thenn everything down) (you'll get a row with 0's between the sheets, which can be filtered out or deleted later (copy/paste values))
=IFERROR(HLOOKUP(A$1,INDIRECT("'"&INDEX(SList,COUNTIF($A$1:$A1,0)+2)&"'!$A:$G"),$H2,0),"")
Set H2 to 2 and for H3: (autofill down from H3)
=MAX(($H2+1)*($A2>0),2)
works perfectly for me LINK
No manual typing of sheetnames or something like that (only Column H:H as helper). Youll get rows's with 0's every time a new sheet is selected which can be filtered out. (or if you copy/paste values also can be deleted)
the +2 at ...st,COUNTIF($A$1:$A1,0)+2)&... simply tells to start with sheet 2 (if summary is the first). You may change it to +1 if you want to lookup starting with the first sheet.
Assuming you already have all 100+ sheet names typed out in column A, this will work whether or not you have spaces in the sheet names:
=HLOOKUP("University", OFFSET(INDIRECT(ADDRESS(1,1,1,1,A2)),0,0,2,7),2,FALSE)
I have a table that uses a bit of vba to populate column b with id numbers.
I then have column c as a vlookup that gets a name based off the id, from another sheet. The vlookup in the first cell works fine and returns the correct name, John Doe.
When I drag down, the rest of the cells in column c return the same name as the first, John Doe. The vlookup in the other cells is exactly the same, except the reference cell does change, as expected....so, c2 = vlookup(b2, $range, col, false), c3= vlookup(b3..), c4=vlookup(b4,..), etc.
The catch is, when I look at the vlookup in c3 and click on b3, the cell changes to find the correct name (no longer John Doe). So it works fine. And I have to do that for every cell in column c.
It's like vlookup isn't aware that column b changed? Is that something that happens with vba? Is there a refresh command or some other way for vlookup to register that column b has changed without having to click on each individual vlookup function?
If you've entered a formula in a cell, then copied the formula to another cell and Excel hasn't updated your results, that means that Calculation Mode is Manual.
To fix it (depending on version, this is for Excel 2010)
Click on Formulas in the Ribbon
Click on Calculation Options
Click on Automatic
If you need to have it calculate manually (valuable for making many formula changes in a large worksheet):
Click on Formulas in the Ribbon
Click on Calculate Now to calculate the entire workbook, or
Click on Calculate Sheet to calculate the current worksheet
You can skip all the clicking by pressing F9 to Calculate Now or Shift-F9 to Calculate Sheet.