VMs is up on eu-gb region which is great.
However Horizon does not appear to be installed on there, which is fine, as I use the CLI most of the time. However the CLI file that I download from the Bluemix console is not correct.
It is missing the OS_TENANT_ID property. I cannot connect to my OpenStack tenant without this. Where can I get tenant ID from?
according to Bluemix VM documentation
https://www.ng.bluemix.net/docs/virtualmachines/vm_index.html#vm_setup_cli
you should login into your region&org and download the rc file one you are going to create the first VM.
The rc file download following these steps will contain all the information you need to access and manage your VM on Bluemix using openstack client.
In the case of you already downloaded your rc file following these steps I suggest you to try again generating a new one to check the new one contains all the information you need (consider that this environment is still beta and this kind of issues could be expected)
Related
in Azure Storage Explorer i connected to file share through shared access signature(SAS) URI method. after connected, no files are showing under File Shares folder as shown in the image it is keep on loading.
and popping the error message as below after waiting for long time
i'm using Windows 7, Azure Storage Explorer version : 1.10.1, and i have .net 4.0 Framework installed.
Thanks.
This issue may occur due to several reasons like Network issue/ Proxy/subscription/updates/Permissions.
There a few reasons you may be seeing this error: Firstly, I would suggest to try the troubleshooting steps mentioned here:
Delete data from "%appData/StorageExplorer" folder or entire folder from your machine. After deleting when you launch storage explorer you will be prompted to re-enter your credentials.
The uninstall process does not remove all of the files in the local storage, and so I found that on Windows at least if I uninstall MASE and remove the folders that are in C:\Users[username]\AppData\Roaming\Microsoft Azure Storage Explorer and reinstall,
If you are connected to Azure through a proxy, verify that your proxy settings are correct. If you were granted access to a resource from the owner of the subscription or account, verify that you have read or list permissions for that resource.
Connection String Does Not Have Complete Configuration Settings
Refer the following Storage Explorer troubleshooting documentation and let us know if you need further assistance: Unable to Retrieve Children
If the issue still persist un-install and reinstall the latest version 1.11.2
It would also be worth checking if port 445 is open, since File shares are SMB based, port 445 has to be open. Several Internet service providers block it, so it's also worth testing whether it is open and you can connect to it. you can use the following tool to test it: https://gallery.technet.microsoft.com/Troubleshooting-tool-for-a9fa1fe5
Thanks for getting back at me. Sorry for the late reply, it was bed-time this time. I need to connect the Cloud SQL database that I have created to my application that is in App Engine. I tried to follow the online tutorials but when I do apply such info I would get then gcloud app deploy it return a connection error. Please help. Also clarify here: When I execute the gcloud app deploy command I suppose it takes my local file to Google Cloud where I would see the entire folder and files of my project on the project I was deploying but I am seeing the old version of my project while presentation has changed to the latest version. Also last one how can I link domain nam from http://domain.google.com to my app in http://cloud.google.com . Please help I am dying with stress I have been trying in here
Given that you haven't provided any information as to what settings you are using, or what error has been provided it is impossible to know what kind of problem you are running into.
I suggest taking a look at the "Connecting to App Engine" page here. It should answer a lot of your questions around connecting from an App Engine app.
I see two questions here.
1.
I need to connect the Cloud SQL database that I have created to my
application that is in App Engine. I tried to follow the online
tutorials but when I do apply such info I would get then gcloud app
deploy it return a connection error. Please help. Also clarify here:
When I execute the gcloud app deploy command I suppose it takes my
local file to Google Cloud where I would see the entire folder and
files of my project on the project I was deploying but I am seeing the
old version of my project while presentation has changed to the latest
version.
I see your problem here to be with CloudSQL and GAE connectivity. Depending on whether you use GAE Standard or Flex and CloudSQL MySQL or POSTGRES the steps varies. Documentation is quite clear in here though.
2.
Also last one how can I link domain nam from http://domain.google.com
to my app in http://cloud.google.com . Please help I am dying with
stress I have been trying in here
This is going to be super simple, goto GCP cloud console, Navigate to GAE-->Settings-->Custom Domain and click on add custom domain "Enter the domain name you want to link" When you click continue you will be shown the steps for verifying the domain owneship and to point the DNS to the GAE.
Documented properly by GCP folks at https://cloud.google.com/appengine/docs/standard/python/mapping-custom-domains
If you are using GAE Standard or Flex, a possible result of command gcloud app deploy :
An app.yaml (or appengine-web.xml) file is required to deploy this directory as an App Engine App, check next links:
https://cloud.google.com/appengine/docs/flexible/python/configuring-your-app-with-app-yaml
https://cloud.google.com/appengine/docs/flexible/python/writing-application-logs
Mysql and Postgres connection:
https://cloud.google.com/sql/docs/mysql/connect-app-engine
https://cloud.google.com/sql/docs/postgres/connect-app-engine
Sometimes it easy share the app.yaml for replicate the app correctly.
I'm pretty new to Kubernetes and clusters so this might be very simple.
I set up a Kubernetes cluster with 5 nodes using kubeadm following this guide. I got some issues but it all worked in the end. So now I want to install the Web UI (Dashboard). To do so I need to set up authentication:
Please note, this works only if the apiserver is set up to allow authentication with username and password. This is not currently the case with the some setup tools (e.g., kubeadm). Refer to the authentication admin documentation for information on how to configure authentication manually.
So I got to read authentication page of the documentation. And I decided I want to add authentication via a Static Password File. To do so I have to append the option --basic-auth-file=SOMEFILE to the Api server.
When I do ps -aux | grep kube-apiserver this is the result, so it is already running. (which makes sense because I use it when calling kubectl)
kube-apiserver
--insecure-bind-address=127.0.0.1
--admission-control=NamespaceLifecycle,LimitRanger,ServiceAccount,PersistentVolumeLabel,DefaultStorageClass,ResourceQuota
--service-cluster-ip-range=10.96.0.0/12
--service-account-key-file=/etc/kubernetes/pki/apiserver-key.pem
--client-ca-file=/etc/kubernetes/pki/ca.pem
--tls-cert-file=/etc/kubernetes/pki/apiserver.pem
--tls-private-key-file=/etc/kubernetes/pki/apiserver-key.pem
--token-auth-file=/etc/kubernetes/pki/tokens.csv
--secure-port=6443
--allow-privileged
--advertise-address=192.168.1.137
--kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname
--anonymous-auth=false
--etcd-servers=http://127.0.0.1:2379
Couple of questions I have:
So where are all these options set?
Can i just kill this process and restart it with the option I need?
Will it be started when I reboot the system?
in /etc/kubernetes/manifests is a file called kube-apiserver.json. This is a JSON file and contains all the option you can set. I've appended the --basic-auth-file=SOMEFILE and rebooted the system (right after the change of the file kubectl wasn't working anymore and the API was shutdown)
After a reboot the whole system was working again.
Update
I didn't manage to run the dashboard using this. What I did in the end was installing the dashboard on the cluster. copying the keys from the master node (/etc/kubernetes/admin.conf) to my laptop and did kubectl proxy to proxy the traffic of the dashboard to my local machine. Now I can access it on my laptop through 127.0.0.1:8001/ui
I just found this for a similar use case and the API server was crashing after adding an Option with a file path.
I was able to solve it and maybe this helps others as well:
As described in https://kubernetes.io/docs/reference/setup-tools/kubeadm/implementation-details/#constants-and-well-known-values-and-paths the files in /etc/kubernetes/manifests are static pod definitions. Therefore container rules apply.
So if you add an option with a file path, make sure you make it available to the pod with a hostPath volume.
Installed Parse Server on Digital Ocean, and have been trying to use the CLI to manage cloud code. I've hit a wall, since the CLI tool will not move forward without an account key on Parse.com (which no longer offers account keys). For example, if I type in "parse new", I get this:
We've changed the way the CLI works. To save time logging in, you should create an account key. Type "parse configure accountkey" to create a new account key. Read more at: https://parse.com/docs/cloudcode/guide#command-line-account-keys
If you actually do that, it responds:
Input your account key or press ENTER to generate a new one. NOTE: on pressing ENTER we'll try to open the url: "https://www.parse.com/account/keys" in the default browser:
This leads to a login page. Since I don't have an account on Parse.com (nor should it be necessary for Parse Server), I'm stuck. If I click on the "I don't have an account" link, it just takes me to the front page.
I find it hard to believe that there's no way to manage/create cloud code on Parse Server. But, it is sure looking that way. Is this just a failure to update the CLI or am I missing something obvious.
Many thanks.
Parse cli is not meant to be used with parse server. At least not currently. Parse server is simply a node module which means that you will have to handle deployment etc yourself. There are many tools that will handle everything that the parse cli did, and much more, from the nodejs community however.
You said that you used digital ocean. You might want to consider heroku, aws or google cloud. Heroku for example has the heroku cli with many of the same features as the parse cli which might save you some time.
You can't use parse cli on parse-server. Parse-server and parse.com environment are both different , parse-server is just the node module so deployment can be automated using other tools.
I am using forever to restart my parse-server automatically when a file changes. So you can just copy/paste your files using filezilla and that's it.
I'm using the Create Virtual Machine Deployment method of the Azure REST API: http://msdn.microsoft.com/en-us/library/windowsazure/jj157194.aspx
I'm trying to use an image sourced from the VM Depot, with a path such as this:
http://vmdepotwestus.blob.core.windows.net/linux-community-store/community-4-d803ca0a-5d98-4be8-8895-2a9d15ec3974-1.vhd
I am currently getting the following error:
The virtual machine image source is not valid.
I am assuming there is some process which first needs to be completed in order to make that image available to the specific API user, but I can't seem to work out what?
You can't deploy directly from VM Depot. You must first copy the image to your own storage account. There are instructions on the VM Depot help page for doing this via the Azure Management portal (see http://vmdepot.msopentech.com/Help/Help.cshtml#deployingUsingAUX). It can also be done via the CLI tools, see http://www.windowsazure.com/en-us/manage/install-and-configure-cli/#use
It is more complicated. You have to download the VHD from some link in VM Depot in your storage, create the image, then provision the machine.
The command line of VMdepot to do that is in node, so you can very easily reverse it to see how it works.
On the other hand, I do it also with IaaS Management Studio, you might be able to take a look with reflector how I did.