I have been messing around with orientdb sql, and I was wondering if there is a way to update an edge of a vertex, together with some data on it.
assuming I have the following data:
Vertex: Person, Room
Edge: Inside (from Person to Room)
something like:
UPDATE Persons SET phone=000000, out_Inside=(
select #rid from Rooms where room_id=5) where person_id=8
obviously, the above does not work. It throws exception:
Error: java.lang.ClassCastException: com.orientechnologies.orient.core.id.ORecordId cannot be cast to com.orientechnologies.orient.core.db.record.ridbag.ORidBag
I tried to look at the sources at github searching for a syntax for bag with 1 item,
but couldn't find any (found %, but that seems to be for serialization no for SQL).
(1) Is there any way to do that then? how do I update a connection? Is there even a way, or am I forced to create a new edge, and delete the old one?
(2) When writing this, it came to my mind that perhaps edges are not the way to go in this case. Perhaps I should use a LINK instead. I have to say i'm not sure when to use which, or what are the implications involved in using any of them. I did found this though:
https://groups.google.com/forum/#!topic/orient-database/xXlNNXHI1UE
comment 3 from the top, of Lvc#, where he says:
"The suggested way is to always create an edge for relationships"
Also, even if I should use a link, please respond to (1). I would be happy to know the answer anyway.
p.s.
In my scenario, a person can only be at one room. This will most likely not change in the future. Obviously, the edge has the advantage that in case I might want to change it (however improbable that may be), it will be very easy.
Solution (partial)
(1) The solution was simply to remove the field selection. Thanks for Lvca for pointing it out!
(2) --Still not sure--
CREATE EDGE and DELETE EDGE commands have this goal: avoid the user to fight with underlying structure.
However if you want to do it (a little "dirty"), try this one:
UPDATE Persons SET phone=000000, out_Inside=(
select from Rooms where room_id=5) where person_id=8
update EDGE Custom_Family_Of_Custom
set survey_status = '%s',
apply_source = '%s'
where #rid in (
select level1_e.#rid from (
MATCH {class: Custom, as: custom, where: (custom_uuid = '%s')}.bothE('Custom_Family_Of_Custom') {as: level1_e} .bothV('Custom') {as: level1_v, where: (custom_uuid = '%s')} return level1_e
)
)
it works well
Related
I have this statement that is generated by Geoserver
SELECT
shape AS shape
FROM
(
SELECT
c.chantier_id id,
sdo_geom.sdo_buffer(c.shape, m.diminfo, 1) shape,
c.datedebut datedebut,
c.datefin datefin,
o.nom operation,
c.brouillon brouillon,
e.code etat,
u.utilisateur_id utilisateur,
u.groupe_id groupe
FROM
user_sdo_geom_metadata m, lyv_chantier c
JOIN lyv_utilisateur u ON c.createur_id = u.utilisateur_id
JOIN lyv_etat e ON c.etat_id = e.etat_id
JOIN lyv_operation o ON c.operation = o.id
WHERE
m.table_name = 'LYV_CHANTIER'
AND m.column_name = 'SHAPE'
) vtable
WHERE
( brouillon = 0
AND ( etat != 'archive'
OR etat IS NULL )
AND sdo_filter(shape, mdsys.sdo_geometry(2003, 4326, NULL, mdsys.sdo_elem_info_array(1, 1003, 1), mdsys.sdo_ordinate_array(
2.23365783691406, 48.665657043457, 2.23365783691406, 48.9341354370117, 2.76649475097656, 48.9341354370117, 2.76649475097656, 48.665657043457, 2.23365783691406, 48.665657043457)), 'mask=anyinteract querytype=WINDOW') = 'TRUE' );
On my local instance (dockerized if that can explain anything) it works fine, but on another instance I get an error :
ORA-13226: interface not supported without a spatial index
I guess that the SDO_FILTER is applied to the result of SDO_BUFFER which is therefore not indexed.
But why is it working on my local instance ?!
Is there some kind of weird configuration shenanigan that could explain the different behavior maybe ?
EDIT : The idea behind this is to get around a bug in Geoserver with Oracle databases where it renders only the first point of MultiPoint geometries, but works fine with MutltiPolygon.
I am using a SQL view as layer in Geoserver (hence the subselect I guess).
First, you need to do some debugging here.
Connect to each instance, on the same user as your Geoserver's datasource, and run the sql. From the same connections (in each instance) you must also verify that the user's metadata view (user_sdo_geom_metadata) have an entry for the table and the table has a spatial index - whose owner is the same user as the one you connect.
Also, your query ( select ... from 'vtable') has a column 'shape' which is a buffer of the column lyv_chantier.shape. The sdo_filter, in this sql, expects a spatial index on the vtable.shape - which cannot exist. You should try to use a different alias (e.g. buf_shape) and sdo_filter(buf_shape,...) - to see if the sql fails in both instances, as it should.
I'm in a bit of a hurry right now, so my instructions are summarized. If you want, do this debugging and post the results. We then can go into details.
EDIT: Judging from your efforts, I'd say that the simplest approach is: 1) add a second geometry column to lyv_chantier (e.g. buf_shp). 2) update lyv_chantier set buf_shp = sdo_geom.sdo_buffer(shape,...). 3) insert into user_sdo_geom_metadata the values (lyv_chantier, buf_shp, ...). 4) create a spatial index on column buf_shp. You may need to consider a trigger to update buf_shp whenever shape changes...
This is a very practical approach but you don't provide any info about your case (what is the oracle version, how many rows does the table have, how is it used, why do you want to use sdo_buffer, etc), so that's my recommendation for now.
Also, since you are, most likely, using an sql view as layer in Geoserver (you don't say anything about that, either), you could also consider using pure GS functionality to achieve your goal.
At the end, without describing your goal, it's difficult to provide anything more tailor-made.
How can I get a list of all topics that I created?
I think it should be something like
%SEARCH{ "versions[-1].info.author = '%USERNAME%" type="query" web="Sandbox" }%
but that returns 0 results.
With "versions[-1]" I get all topics, and with "info.author = '%USERNAME%'" a list of the topics where the last edit was made by me. Having a list of all topics where any edit was made by me would be fine, too, but "versions.info.author = '%USERNAME%'" again gives 0 results.
I’m using Foswiki-1.0.9. (I know that’s quite old.)
The right syntax would be
%SEARCH{ "versions[-1,info.author='%USERNAME%']" type="query" web="Sandbox"}%
But that's not performing well, i.e. on your old Foswiki install.
Better is to install DBCacheContrib and DBCachePlugin and use
%DBQUERY{"createauthor='%WIKINAME%'"}%
This plugin caches the initial author in a way it does not have to retrieve the information from the revision system for every topic under consideration during query time.
I'm triying to retrieve a ClassDescription symbolicName of an IDocument object. It seems that i have to fetch its ClassDescription even if I just want the symbolicName.
Is there a way to do it ? I just want to avoid doing a fetch for every browsed document...
(Also IDocument.GetClassName doesn't help, it returns "Document")
I finally found a way, by making an SQL SELECT request retrieving the classDescription ID (which is not the symbolicName ID, but rather an "internal" one) :
Select This, d.Id, d.ClassDescription
From Document d
where d.Id = ID
It seems to be lighter than a line like document.fetch(classDescription) (pseudo call) cause it should just retrieves the ID.
I thought it worth mentioning a problem regarding the accepted answer.
There are times that doing a query would be "lighter" however I believe you are missing something involving fetching a document.
FileNet's fetchInstance command can take in a PropertyFilter.
In your case you could do something along the lines of:
PropertyFilter pf = new PropertyFilter();
pf.AddIncludeProperty(new FilterElement(null, null, null, "ClassDescription", null));
doc = Factory.Document.FetchInstance(os, new Id("doc.ID()"), pf);
You would probably want to look at your original fetch of this document and make sure to specify the full list of property filters at that point.
See Working With Documents
I'm reading a set of rows from a remote database, and a similar set from a local database, and then using RemoveAll to get rid of remote rows that are already present locally...
remote_events = (From a In remote.Events
Where ...etc...).ToList
local_events = (From a In local.Events
Where ...etc...).ToList
remote_events.RemoveAll(Function (ByVal event_row As Remote_Event)
(From a In local_events Where a.Identifier = event_row.Identifier).Count > 0)
but this doesn't seem right to me. I don't think I should be counting things when all I really need to do is check whether a match exists. I've tried various usages of IsDBNull and IsNothing but get nonsense. I can't use .Except (as suggested here) because the list elements are not the same type.
Is there a better way of doing this?
One way is this:
remote_events.RemoveAll(Function(e) local_events.Exists(Function(f) f.Identifier = e.Identifier))
I'm trying to do this without visual studio, so I'm not sure if this will work, but I'd suppose you could do something along these lines if what you're trying to do is compare the Identifier:
Remote_Events = (From r_evt In Remote_Events
Where Not ((From l_evt In Local_Events Select l_evt.Identifier).Contains(r_evt.Identifier))
Select r_evt).ToList
I hope this helps and at least moves you in the right direction.
I'm trying to generate a new SharePoint list item directly using SQL server. What's stopping me is damn tp_DirName column. I have no ideas how to create this value.
Just for instance, I have selected all tasks from AllUserData, and there are possible values for the column: 'MySite/Lists/Task', 'Lists/Task' and even 'MySite/Lists/List2'.
MySite is the FullUrl value from Webs table. I can obtain it. But what about 'Lists/Task' and '/Lists/List2'? Where they are stored?
If try to avoid SQL context, I can formulate it the following way: what is the object, that has such attribute as '/Lists/List2'? Where can I set it up in GUI?
Just a FYI. It is VERY not supported to try and write directly to SharePoint's SQL Tables. You should really try and write something that utilizes the SharePoint Object Model. Writing to the SharePoint database directly mean Microsoft will not support the environment.
I've discovered, that [AllDocs] table, in contrast to its title, contains information about "directories", that can be used to generate tp_DirName. At least, I've found "List2" and "Task" entries in [AllDocs].[tp_Leaf] column.
So the solution looks like this -- concatenate the following 2 components to get tp_DirName:
[Webs].[FullUrl] for the web, containing list, containing item.
[AllDocs].[tp_Leaf] for the list, containing item.
Concatenate the following 2 components to get tp_Leaf for an item:
(Item count in the list) + 1
'_.000'
Regards,
Well, my previous answer was not very useful, though it had a key to the magic. Now I have a really useful one.
Whatever they said, M$ is very liberal to the MOSS DB hackers. At least they provide the following documents:
http://msdn.microsoft.com/en-us/library/dd304112(PROT.13).aspx
http://msdn.microsoft.com/en-us/library/dd358577(v=PROT.13).aspx
Read? Then, you know that all folders are listed in the [AllDocs] table with '1' in the 'Type' column.
Now, let's look at 'tp_RootFolder' column in AllLists. It looks like a folder id, doesn't it? So, just SELECT the single row from the [AllDocs], where Id = tp_RootFolder and Type = 1. Then, concatenate DirName + LeafName, and you will know, what the 'tp_DirName' value for a newly generated item in the list should be. That looks like a solid rock solution.
Now about tp_LeafName for the new items. Before, I wrote that the answer is (Item count in the list) + 1 + '_.000', that corresponds to the following query:
DECLARE #itemscount int;
SELECT #itemscount = COUNT(*) FROM [dbo].[AllUserData] WHERE [tp_ListId] = '...my list id...';
INSERT INTO [AllUserData] (tp_LeafName, ...) VALUES(CAST(#itemscount + 1 AS NVARCHAR(255)) + '_.000', ...)
Thus, I have to say I'm not sure that it works always. For items - yes, but for docs... I'll inquire into the question. Leave a comment if you want to read a report.
Hehe, there is a stored procedure named proc_AddListItem. I was almost right. MS people do the same, but instead of (count + 1) they use just... tp_ID :)
Anyway, now I know THE SINGLE RIGHT answer: I have to call proc_AddListItem.
UPDATE: Don't forget to present the data from the [AllUserData] table as a new item in [AllDocs] (just insert id and leafname, see how SP does it itself).