I have been asked to deploy WCF service to mod_mono at CentOS and i am sequentially using given below STEPS to install mono and mod_mono.
Every things installs well ,but i can not find /usr/local/apache2/modules/mod_mono.so (which i come to know is a important file to set up mod_mono server ).
Can anyone please tell me what wrong i am doing.
P.S: I am new to linux so please excuse if it is a silly question.
STEPS:
wget http://download.mono-project.com/sources/mono/mono-2.10.2.tar.bz2
wget http://download.mono-project.com/sources/mod_mono/mod_mono-2.10.tar.bz2
cd /mono-2.10.2
./configure --prefix=/opt/mono
make ; make install
cd ../mod_mono-2.10
./configure --prefix=/opt/mono --with-mono-prefix=/opt/mono
make ; make install
I was able to run by downgrading mySql version.
Related
Has anyone built ssldump on Ubuntu lately? I am having trouble building http://downloads.sourceforge.net/project/ssldump/ssldump/0.9b3/ssldump-0.9b3.tar.gz - it appears to be referencing libraries that are too old for Ubuntu 12.04. I am trying this so that I can apply the TLS patch that is at http://sourceforge.net/p/ssldump/patches/8/.
If anyone has specific instructions to build ssldump, please share.
Assuming you have the necessary development libraries (personally, the easiest way for me is to "sudo apt-get install gnome-devel")
sudo apt-get install libpcap0.8-dev
sudo ln -sf /usr/include/pcap-bpf.h /usr/include/net/bpf.h
sudo apt-get install libssl-dev
Then cd into the ssldump source directory and: ./configure --host=i686-pc-linux-gnu --with-pcap-lib=/usr/lib/x86_64-linux-gnu/
make -j4
That should get you there. It worked for me on ubuntu 15.04. I may have missed out a few things though, cos I did it a couple of weeks ago, so if something doesn't work, leave a comment.
I'm trying to get mod_mono working on CentOS 6.5. I have many failed attempts where either something does not compile at all or fails when trying to run a website. I've tried both latest from git, tarball from git releases, and tarballs of different versions from http://download.mono-project.com/sources/mono/. All fail in one way or another.
So far the "most" working solution I've found is to download this: http://download.pokorra.de/mono/tarballs/mono-3.2.6.tar.bz2 and use latest xsp and mod_mono from under mono-project site.
Problem is even though mod_mono installation went ok, i get this in httpd/error_log:
[error] Failed running '/usr/lib/pkgconfig/../../bin/mod-mono-server2 --filename /tmp/mod_mono_server_global --nonstop --master (null) (null) (null) (null) (null) (null) (null) (null)'. Reason: No such file or directory
So mod_mono does not run. What could be causing this? There are no errors in make or make install output.
Most importantly:
locate mod-mono-server
/usr/local/src/xsp-3.0.11/man/mod-mono-server.1
/usr/local/src/xsp-3.0.11/scripts/mod-mono-server
/usr/local/src/xsp-3.0.11/scripts/mod-mono-server2
/usr/local/src/xsp-3.0.11/scripts/mod-mono-server4
/usr/local/src/xsp-3.0.11/src/Mono.WebServer.Apache/mod-mono-server2.exe
/usr/local/src/xsp-3.0.11/src/Mono.WebServer.Apache/mod-mono-server2.exe.mdb
/usr/local/src/xsp-3.0.11/src/Mono.WebServer.Apache/mod-mono-server4.exe
/usr/local/src/xsp-3.0.11/src/Mono.WebServer.Apache/mod-mono-server4.exe.mdb
/usr/local/src/xsp-3.0.11/test/mod-mono-server.exe.config
/usr/share/man/man1/mod-mono-server.1
There are no mod-mono-servers anywhere else except under sources.
Mono itself is fine, I can run a small console application using mono mytestapp.exe.
I installed mod_mono (like mono and xsp) using prefix /usr:
./configure --prefix=/usr
make && make install
I can see mod_mono.conf generated correctly.
Please forgive me if this is really a hilariously silly question, but what's going on? I would have expected to see something under /usr/bin and /usr/lib but there's nothing even though mod_mono installs without errors.
Edit: Just a side note, as opposed to some other installation, xsp runs fine. With other mono installations I had exceptions in the xsp output.
Most likely, you are trying to run /usr/bin/mod-mono-server2, which most likely does not exist, rather than /usr/bin/mod-mono-server4.
The solution which I just tested is to
sudo apt-get update followed sudo apt-get install mono-apache-server4
create a symbolic link from /usr/bin/mod-mono-server2 to
/usr/bin/mod-mono-server4 like this:
sudo ln -s mod-mono-server4 mod-mono-server2
I am a novice with zeroMQ and I am stuck at binding ØMQ with java on a server running CentOS release 5.9.
Unfortunately, I do not have super user/root privileges on the server and am trying to install ØMQ as a normal user with restricted privileges. I have installed ØMQ by following instructions on http://www.zeromq.org/area:download
Make sure that libtool, autoconf, automake are installed.
Check whether uuid-dev package, uuid/e2fsprogs RPM or equivalent on your system is installed.
Unpack the .tar.gz source archive.
Run ./configure, followed by make.
Could not run the following obviously
To install ØMQ system-wide run sudo make install.
On Linux, run sudo ldconfig after installing ØMQ.
Then I attempted to install jzmq.
Cloned [git clone https://github.com/zeromq/jzmq.git]
Ran autogen.sh
Ran configure
At this point I get the following error
checking for ZeroMQ... no
checking zmq.h usability... no
checking zmq.h presence... no
checking for zmq.h... no
configure: error: cannot find zmq.h
As a result of the above error I am not able to run java tests and get error "no jzmq in java.library.path".
Can anybody help/direct me to how to get java binding for zeromq work when you dont have root privileges to install it? Its difficult to get IT department to install a new software on servers.
Appreciate your help.
Note: I do not have write permissions to /usr directory
Thanks
GBP
This can be overcome by adding --with-zeromq=/home/user/zeromq (installation directory of zeromq)
./configure --with-zeromq=/home/user/zeromq
Other steps include
export LD_LIBRARY_PATH=/home/user/zeromq/lib
You can also use JeroMQ (https://github.com/zeromq/jeromq) which is a pure Java implementation of ZeroMQ
I got this working by running autogen.sh on OEL 6 then running configure / compiling / installing on CentOS 5.9. I briefly looked into why autogen.sh was failing and the problem was the tool chain was too old. Since I had a more up-to-date system with a modern tool chain available running autogen.sh on something other than CentOS 5 was the easiest path for me. I'm sure it works fine with other modern Linux variants, I had OEL 6 at my finger tips.
I also did not have access to a standard directory for installation. To get that working I added zmq.jar to my class path, and the run-time linker needed to be able to find the zeromq and jzmq run-time libraries.
I faced the same issue on CentOS 6.5 and found that you need to install "gcc-c++" for this to work.
I used the following to install dependencies:
yum -y install jdk zeromq-devel unzip libtool gcc autoconf automake gcc-c++ python
Note that "jdk" comes from our private repository and it's same what can be downloaded from java.com
The following public repositories are installed on server:
atomic
Actually, I ended up having this same issue, and the following script worked for me, where I installed zeromq into ~ (so that I have ~/lib contains libzmq.a libzmq.la libzmq.so libzmq.so.3 libzmq.so.3.1.0 pkgconfig)
./autogen.sh ./configure --prefix=$HOME \ #because you don't have root privileges
--with-zeromq=$HOME --includedir=$HOME/include/ --libdir=$HOME/lib/
./make
./make -n install
#to check to see if it installs it to the right location
make install
I seem to be having a hard time getting the Apache module for Hyperic to compile in Ubuntu 8.10. Has anyone had any luck getting it to work? Does anyone have a precompiled version?
I am running Hyperic HQ version 4.1.2 build #1053, Apache 2.2.x
I got it to work by doing the following:
Symbolically link aclocal and automake old hard coded version to your current version (replace version numbers 1.11 to your own):
sudo ln -s /usr/bin/aclocal-1.11 /usr/bin/aclocal-1.6
sudo ln -s /usr/bin/automake-1.11 /usr/bin/automake-1.6
Rename a conflicting header file:
sudo mv /usr/include/openssl/asn1.h /usr/include/openssl/asn_1.h
Run the installer:
sudo ./build_apache_snmp.sh -r 2.0 /usr/bin/apxs2
Once it is finished make sure you follow the directions located at ./README
Once you have confirmed that the SNMP service is working (using the snmpwalk application that the readme file refers to), reverse the steps above to revert system changes just needed to compile the plugin.
I'm trying to connect to SQL Server on Ubuntu 9.04 using Ruby. I translated and followed all the steps outlined in getting OSX talking to SQL Server from here:
http://toolmantim.com/articles/getting_rails_talking_to_sqlserver_on_osx_via_odbc
Everything is working on the FreeTDS and unixODBC end. I can see and query the database using tsql.
When I try to access the database from Ruby using IRB I get the following error:
DBI::DatabaseError : INTERN (0) [RubyODBC] Cannot allocate SQLHENV
Has anyone run into this and what can I do to solve this?
I started getting this error when I upgraded to Ubuntu 9.10 (Karmic Koala). Your tip regarding installation order of the Ubuntu packages didn't work for me.
It seems the fix was to manually compile ruby-odbc.
wget http://www.ch-werner.de/rubyodbc/ruby-odbc-0.9997.tar.gz
tar xzvf ruby-odbc-0.9997.tar.gz
cd ruby-odbc-0.9997
ruby extconf.rb --with-dlopen
make
sudo make install
System
Ubuntu 9.10 64 bit
I had to specify the odbc directory in the rubyodbc install
wget http://www.ch-werner.de/rubyodbc/ruby-odbc-0.9997.tar.gz
tar xzvf ruby-odbc-0.9997.tar.gz
cd ruby-odbc-0.9997
ruby extconf.rb --with-odbc-dir=/usr/lib/odbc --disable-dlopen
make
sudo make install
I had the same problem.
But on Centos 5.5 not Ubuntu
Tried many forums/solutions with no joy.
The error message hints at a missing reference to unixODBC.
Which was setting using LD_LIBRARY_PATH variable.
Found another way to set path, by creating
/etc/ld.so.conf.d/odbc.conf.
add unixODBC location to file ie /usr/local/lib.
Run, sudo ldconfig.
Go fig that I actually got this working after submitting my question. What I ended up doing was uninstall libdbd-odbc-ruby and libdbi-ruby and then reinstalling them by installing libdbi-ruby first and then installing libdbd-odbc-ruby. I guess when I installed them before, something must of messed up.
BTW, following the instructions to recompile Ruby-ODBC on Ubuntu 9.10 (Karmic) required installation of either the libiodbc2-dev or the unixodbc-dev package. When using libiodbc2-dev, I got segmentation faults when my Ruby program tried:
connection.select_all('select top 15 * from log_device_healths')
..but no problem when using unixodbc-dev instead.
Tim Morgan's solution didn't work for me. However I was able to get things working by installing an older version of libodbc-ruby (0.9995) from here:
http://mirrors.kernel.org/ubuntu/pool/universe/libo/libodbc-ruby/libodbc-ruby1.8_0.9995-1_i386.deb
Additional details are available from Carsten Gehling's blog:
http://gehling.dk/2010/02/the-woes-of-libodbc-ruby1-8-and-debian-ubuntu/
Be careful though -- Ubuntu's Update Manager will happily "upgrade" this version of libodbc-ruby to the broken 0.9997-2. I accidentally overwrote the older version this way only to end up back here, trying to figure out how I fixed it last time.
Well, it seems my other answer stopped working for me. This thread helped me to solve the issue in another way, and I wanted to share it here.
sudo gem uninstall ruby-odbc
sudo rm /usr/local/lib/site_ruby/1.8/x86_64-linux/odbc.so
cd /tmp
wget http://mirrors.kernel.org/ubuntu/pool/universe/libo/libodbc-ruby/libodbc-ruby1.8_0.9995-1_amd64.deb
sudo dpkg -i libodbc-ruby1.8_0.9995-1_amd64.deb
If you're not on a 64-bit platform, you'll need to download a different Debian package.
Basically, what solves the problem is installing version 0.9995 of the ruby-odbc Ubuntu package.