So I am trying to install this Navigation Framework in my app:
https://github.com/weissi/FRLayeredNavigationController
http://www.youtube.com/watch?v=k9bFAYtoenw&feature=plcp
Now, if you look at the attached image, I have my login screen. Once the login is done, I do a Segue Modal push into my "home" page and in there, I want to start having the FRLayeredNavigationController once I reach my homepage. Is that possible while using the storyboard? According to the Youtube Video, one would usually use the FRLayeredNavigationController by doing:
- (BOOL)application:(UIApplication *)application didFinishLaunchingWithOptions:(NSDictionary *)launchOptions
{
// Override point for customization after application launch.
HomeViewController* homeController = [[HomeViewController alloc] init];
FRLayeredNavigationController* lnc = [[FRLayeredNavigationController alloc] initWithRootViewController:homeController];
self.window.rootViewController = lnc;
}
[self.layeredNavigationController pushViewController:vc inFrontof:self maximumWidth:NO animated:YES];
I have not fount a way to do this using Segue's... But the way I have accomplish this is as follows:
Providing the login was successful and you are wanting to move onto the next part of you app, then the following is how you would transition:
- (void)loginSucceeded
{
UIViewController * vc = (UIViewController*)[self.storyboard instantiateViewControllerWithIdentifier:#"someIdentifier"];
FRLayeredNavigationController * nav = [[FRLayeredNavigationController alloc] initWithRootViewController:vc configuration:^(FRLayeredNavigationItem *item) {
item.width = 300;
item.nextItemDistance = 90;
}];
[self presentViewController:nav animated:YES completion:nil];
}
You will need to set the Storyboard ID to that specified in the above methos. This can be found in the 'Identity Inspector' tab when viewing the storyboard and selecting the ViewController you have designed.
Also you will no longer need to perform the segue you had previously created, so delete that.
Any future view controllers you want to 'push' onto the screen, you simply need to call the following:
UIViewController * vc = (UIViewController*)[self.storyboard instantiateViewControllerWithIdentifier:#"SomeStoryboardIDHere"];
[self.layeredNavigationController pushViewController:vc inFrontOf:self maximumWidth:YES animated:NO];
Related
I'm trying to make a modal view controller in my app delegate (I created a function called showLoginView). But whenever I try to call it I get a warning in XCode:
Warning: Attempt to present <PSLoginViewController: 0x1fda2b40> on <PSViewController: 0x1fda0720> whose view is not in the window hierarchy!
Here's the method code:
- (void)showLoginView
{
PSLoginViewController *loginViewController = [[UIStoryboard storyboardWithName:#"MainStoryboard" bundle:NULL] instantiateViewControllerWithIdentifier:#"PSLoginViewController"];
[self.window.rootViewController presentViewController:loginViewController animated:NO completion:nil];
}
How can I add the view to the window hierarchy? Or maybe I'm doing something very wrong?
You can't display a modal view controller from the appDelegate. You need to display a modal ViewController from whichever viewController is currently displaying full-screen. In other words, you need to put that code into your root view controller, or whichever one you want to display the modal vc from...
Also, you'll want to use the method "presentModalViewController" to present the modal. You can set properties on the modal vc such as:
vC.modalPresentationStyle = UIModalPresentationFormSheet;
vC.modalTransitionStyle = UIModalTransitionStyleCoverVertical;
[self presentModalViewController:vC animated:YES];
You can actually present a modal view Controller from the AppDelegate as long as you detect the current visible viewController and take care of the case where you current controller is a navigationController.
Here is what I do:
UIViewController *activeController = [UIApplication sharedApplication].keyWindow.rootViewController;
if ([activeController isKindOfClass:[UINavigationController class]]) {
activeController = [(UINavigationController*) activeController visibleViewController];
}
[activeController presentModalViewController:loginViewController animated:YES];
UIViewController *activeController = [UIApplication sharedApplication].keyWindow.rootViewController;
if ([activeController isKindOfClass:[UINavigationController class]])
{
activeController = [(UINavigationController*) activeController visibleViewController];
}
else if (activeController.modalViewController)
{
activeController = activeController.modalViewController;
}
[activeController presentModalViewController:vc animated:YES];
I ran into this problem on iOS 7 - the key to making any of the proposed solutions work was to call
[self.window makeKeyAndVisible];
in your AppDelegate.
After that call, presenting a modal view from the window's rootViewController worked.
Another reason for that warning can be that you want to present a view controller from an instance which is not the top most view controller.
So first you have to get the topmost UIViewController and using this instance to call presentViewController:
UIViewController *root = [UIApplication sharedApplication].keyWindow.rootViewController;
while (root.presentedViewController) {
root = root.presentedViewController;
}
You can NSLog(#"%#", self.window.rootViewController), and see what the rootViewController really is.
I came into this problem, when the rootViewController is a normal UIViewController.
Replace it with a UINavigationController, wish it will help.
Faced this issue while trying to present controller from the call of delegate of other controller . i.e : show search filter with delegate , once done back to my controller and receive data via the delegate then present controller , all I had to do is to dispatch the present code cause while in a delegate you're in another thread , that's why you're presenting on your view from main thread another controller from that other thread , so have to go back to main thread , just put the presenting code like this :
dispatch_async(dispatch_get_main_queue(), ^{
[self presentViewController:searchVC animated:true completion:nil];
});
Hope this helps !
I have a navigation based app with a navigation bar, but there are a few instances where instead of pushing a view controller onto the stack, I need to present the view controller modally. The problem is that when I dismiss the modal view controller, everything functions as expected except that the navigation bar is hidden and the (parent view) has been resized, which is the expected behavior according to the docs. So I figured I could simply call a built-in method to unhide the navigation bar. I have already tried
[self.navigationController setNavigationBarHidden:NO];
as well as the animated version without success.
The documentation talks about this in the method
presentModalViewController: animated:
in the discussion section where it says,
On iPhone and iPod touch devices, the view of modalViewController is always presented full screen" and "Sets the modalViewController property to the specified view controller. Resizes its view and attaches it to the view hierarchy."However, the docs didn't clue me in as to how to undo this process after dismissing a modal view.
Has anyone else experienced this and found a solution?
Edit: I am having this same problem, so instead of asking my own question I am sponsoring a bounty on this one. This is my specific situation:
In my case, I am presenting an Image Picker in a Modal View Controller, over a Navigation Controller:
-(void) chooseImage {
if ([UIImagePickerController isSourceTypeAvailable:UIImagePickerControllerSourceTypePhotoLibrary]) {
imagepicker = [[UIImagePickerController alloc] init];
imagepicker.allowsEditing = NO;
imagepicker.delegate = self;
imagepicker.sourceType = UIImagePickerControllerSourceTypePhotoLibrary;
imagepicker.navigationBar.opaque = true;
imagepicker.wantsFullScreenLayout = NO;
if (UI_USER_INTERFACE_IDIOM() == UIUserInterfaceIdiomPad) {
if (self.view.window != nil) {
popoverController = [[UIPopoverController alloc] initWithContentViewController:imagepicker];
[popoverController presentPopoverFromBarButtonItem:reset permittedArrowDirections:UIPopoverArrowDirectionDown animated:YES];
} else {}
} else {
[self.navigationController presentModalViewController:imagepicker animated:YES];
}
}
}
-(void) imagePickerController:(UIImagePickerController *)picker didFinishPickingMediaWithInfo:(NSDictionary *)info {
if (UI_USER_INTERFACE_IDIOM() == UIUserInterfaceIdiomPad) {
[self.popoverController dismissPopoverAnimated:true];
} else {
[self.navigationController dismissModalViewControllerAnimated:YES];
}
//Save the image
}
-(void) imagePickerControllerDidCancel:(UIImagePickerController *)picker {
if (UI_USER_INTERFACE_IDIOM() == UIUserInterfaceIdiomPad) {
[self.popoverController dismissPopoverAnimated:true];
} else {
[self.navigationController dismissModalViewControllerAnimated:YES];
}
}
Make sure you a presenting AND dismissing the modalViewController from the UINavigationController, like so:
// show
[self.navigationController presentModalViewController:vc animated:YES];
// dismiss
[self.navigationController dismissModalViewControllerAnimated:YES];
If your view controller is actually on the UINavigationController's stack then this is the correct way to handle the presentation and dismissal of the modal view controller. If your UINavigationBar is still hidden, there is something else funky going on and we would need to see your code to determine what is happening.
Edit
I copied your code into an app of mine and the UIImagePickerController successfully presented and dismissed and my UINavigationController's UINavigationBar was still there. I truly believe that the problem lays elsewhere in your architecture. If you upload a zip w/ an example project I will take a look.
Simply try following code it will work
SettingsViewController *settings = [[SettingsViewController alloc] init];
UINavigationController *navcont = [[UINavigationController alloc] initWithRootViewController:settings];
[self presentModalViewController:navcont animated:YES];
[settings release];
[navcont release];
One need to present the navigation controller in order to have navigation bar on the presented controller
I think I've seen this behavior when presenting a view controller on the wrong VC. Are you calling presentModalViewController on the navigation controller or the individual VC?
Try calling it from the navigationController if you aren't already.
[self.navigationController presentModalViewController:myVC animated:YES];
If you present a controller as model, View controller will appear to total view.
If you want to access the navigation controller properties over the model view, You need to create another navigation controller reference and it continues as previous.
This may be useful for you.
Check this out. This is Apple's Documentation under UIViewController Class Reference:
It clearly mentions that modal view always presents in full screen mode, so it is obvious that navigation bar will be hidden. So put the seperate navigation bar on modal view to navigate back.
presentModalViewController:animated:
Presents a modal view managed by the given view controller to the user.
- (void)presentModalViewController:(UIViewController *)modalViewController animated:(BOOL)animated
Parameters
modalViewController
The view controller that manages the modal view.
animated
If YES, animates the view as it’s presented; otherwise, does not.
Discussion
On iPhone and iPod touch devices, the view of modalViewController is always presented full screen. On iPad, the presentation depends on the value in the modalPresentationStyle property.
Sets the modalViewController property to the specified view controller. Resizes its view and attaches it to the view hierarchy. The view is animated according to the transition style specified in the modalTransitionStyle property of the controller in the modalViewController parameter.
Availability
Available in iOS 2.0 and later.
Hope this helps you understand that hiding the whole view along with navigation controller is default behaviour for modal view so try putting a seperate navigation bar in modal view to navigate.
You can check it further on this link
http://developer.apple.com/library/ios/#documentation/uikit/reference/UIViewController_Class/Reference/Reference.html
AddContactVC *addController =[self.storyboard instantiateViewControllerWithIdentifier:#"AddContactVC"];
UINavigationController *navigationController = [[UINavigationController alloc]initWithRootViewController:addController];
[self presentViewController:navigationController animated:YES completion: nil];
working for me shows navigation bar
Emphatic and Devin –
As I started reading through the Apple docs to get familiar with the problem, I noticed that the method you're using, presentModalViewController:animated:, appears to be deprecated in favor of presentViewController:animated:completion:. Perhaps you should try to use that method instead.
For your convenience, take a look for yourself:
presentModalViewController:animated: reference
I'll try to put together a quick test program to see whether what I've said above is actually true. But give it a shot – maybe it'll help!
Xcode has a template that does pretty close to what you're doing. from the results, i don't think you should be attempting to perform [self.navigationController presentModalViewController:vc] and [self.navigationController dismissModalViewControllerAnimated:] , but rather simply [self presentModalViewController:] and [self dismissModalViewControllerAnimated:] .
to see how the template does this for yourself, you can use the new project wizard in xcode 4.3 . perhaps it will provide some guidance:
from that choice, choose Next, then give your test project a name, choose "Universal", turn off automatic reference counting, hit next, save where you want it.
now, click on the target and switch the deployment target to 4.3 (or 4.0 if you prefer) for your testing purposes, and switch to your device or the iOS 4.3 simulator .
finally, substitute the following code in applicationDidFinishLaunching:withOptions: in the created AppDelegate.m:
self.window = [[UIWindow alloc] initWithFrame:[[UIScreen mainScreen] bounds]];
// Override point for customization after application launch.
if ([[UIDevice currentDevice] userInterfaceIdiom] == UIUserInterfaceIdiomPhone) {
self.mainViewController = [[[MainViewController alloc] initWithNibName:#"MainViewController_iPhone"
bundle:nil] autorelease];
} else {
self.mainViewController = [[[MainViewController alloc] initWithNibName:#"MainViewController_iPad"
bundle:nil] autorelease];
}
UINavigationController* navigationController
= [[UINavigationController alloc] initWithRootViewController:self.mainViewController];
self.window.rootViewController = navigationController;
[self.window makeKeyAndVisible];
return YES;
now, when i run this, it doesn't hide the navigationBar. and in the created MainViewController.m from the template, you'll see how it presents the modal view controller and dismisses it from the controller itself and not from the navigation controller. for good measure, to make the template code more like your own, go into MainViewController.m and delete the line that sets the modal view controller transition style ...
(of course, in iOS 5, with storyboards, the same thing can all be accomplished with modal segues ... which is how i've done this for apps that i'm not supporting for pre-5.0 that present a modalViewController in this fashion.)
One of the best solution it to use this Category MaryPopin
https://github.com/Backelite/MaryPopin
I want to add admob to the base app delegate so that I can have a persistent ad that will show though out all views instead of refreshing the every time i change the view Controllers.
"bannerView_.rootViewController = self;" is the problem i do not know how to get this to work across all the view controllers. How can I from the base app delegate be able to get the current viewcontroller displayed on the app.
This is the code that i have currently in app delegate
- (BOOL)application:(UIApplication *)application didFinishLaunchingWithOptions:(NSDictionary *)launchOptions
{
// Create a view of the standard size at the bottom of the screen.
bannerView_ = [[GADBannerView alloc]
initWithFrame:CGRectMake(0.0,
self.window.frame.size.height -
GAD_SIZE_320x50.height,
GAD_SIZE_320x50.width,
GAD_SIZE_320x50.height)];
// Specify the ad's "unit identifier." This is your AdMob Publisher ID.
bannerView_.adUnitID = #"a14e0dssddb01d";
// Let the runtime know which UIViewController to restore after taking
// the user wherever the ad goes and add it to the view hierarchy.
bannerView_.rootViewController = self;
// Initiate a generic request to load it with an ad.
[bannerView_ loadRequest:[GADRequest request]];
//[self.window addSubview:navController.view];
[self.window addSubview:bannerView_];
[self.window makeKeyAndVisible];
return YES;
}
I'm trying to create another UINavigationBar in my project, but it seems that I'm missing some key detail. When the application first loads, it does have it's own navigation system, but now I'm trying to add another navigation to a modal.
Many tutorials show you need to connect the view to the [self window], which only seems to work in the AppDelegate files, but when I've tried placing the code* in viewDidLoad, I can never seem to build without any errors.
I've seen this in multiple apps, but how is this done (programmatically or with IBuilder)?
Thanks!
Example code I've tried in viewDidLoad
UINavigationController *navigationController = [[UINavigationController alloc] initWithRootViewController:[self viewController]];
[self.window addSubview:navigationController.view];
You don't show enough code to be able to understand how you do it, but it seems to me that you are showing a controller modally, then trying to add as a subview to its view a navigation controller.
You can try and directly push modally your navigation controller (from your app delegate or where it makes sense for your app):
(IBAction) navigateToSecondaryViewController {
if (secondaryViewController == nil) {
informationTableViewController = [[SecondaryViewController alloc]
initWithNibName:#"SecondaryViewController"
bundle:[NSBundle mainBundle]];
secondaryViewController.delegate = self;
}
if (navController == nil) {
navController = [[UINavigationController alloc]
initWithRootViewController:secondaryViewController];
}
[self presentModalViewController:navController animated:YES];
}
Full example here.
I usually create my projects without IB-stuff. The first thing I do is to strip off all references to xibs, outlets updated plist, etc and so forth. No problems, works great (in my world)!
Now, I just installed 3.2 and tried to develop my first iPad app. Following same procedure as before, I created a UISplitView-based application project and stripped off all IB-stuff. Also, I followed the section in Apple's reference docs: Creating a Split View Controller Programmatically, but nevertheless, the Master-view is never shown, only the Detail-view is (no matter what the orientation is). I really have tried to carefully look this through but I cannot understand what I have missed.
Is there a working example of a UISplitViewController without the nibs floating around somewhere? I have googled but could not find any. Or do you know what I probably have missed?
Declare your splitviewcontroller in your delegate header, use something like this in your didfinishlaunching
ensure you add the UISplitViewControllerDelegate to the detailedViewController header file and that you have the delegate methods aswell. remember to import relevant header files
- (BOOL)application:(UIApplication *)application didFinishLaunchingWithOptions:(NSDictionary *)launchOptions
{
splitViewController = [[UISplitViewController alloc] init];
rootViewController *root = [[rootViewController alloc] init];
detailedViewController *detail = [[detailedViewController alloc] init];
UINavigationController *rootNav = [[UINavigationController alloc] initWithRootViewController:root];
UINavigationController *detailNav = [[UINavigationController alloc] initWithRootViewController:detail];
splitViewController.viewControllers = [NSArray arrayWithObjects:rootNav, detailNav, nil];
splitViewController.delegate = detail;
[window addSubview:splitViewController.view];
EDIT - as per Scott's excellent suggestion below, don't add to the windows subview, instead
[self.window setRootViewController:(UIViewController*)splitViewController]; // that's the ticket
[window makeKeyAndVisible];
return YES;
}
//detailedView delegate methods
- (void)splitViewController:(UISplitViewController*)svc
willHideViewController:(UIViewController *)aViewController
withBarButtonItem:(UIBarButtonItem*)barButtonItem
forPopoverController:(UIPopoverController*)pc
{
[barButtonItem setTitle:#"your title"];
self.navigationItem.leftBarButtonItem = barButtonItem;
}
- (void)splitViewController:(UISplitViewController*)svc
willShowViewController:(UIViewController *)aViewController
invalidatingBarButtonItem:(UIBarButtonItem *)barButtonItem
{
self.navigationItem.leftBarButtonItem = nil;
}
I also prefer code to IB ;-)
Oldish thread, but thought I'd spare reader time + grief when the above technique fails to produce a UISplitViewController that responds correctly to device orientation change events. You'll need to:
Ensure all subordinate views respond properly in
shouldAutorotateToInterfaceOrientation. Nothing new here.
Rather than add the UISplitViewController's view to the main window,
[window addSubview:splitViewController.view]; // don't do this
instead set the main window's root controller to the UISplitViewController:
[self.window setRootViewController:(UIViewController*)splitViewController]; // that's the ticket
Adding the splitviewcontroller's view as a subview of the main window (barely) allows it to co-present with sibling views, but it doesn't fly with UISplitViewController's intended use case. A UISplitViewController is a highlander view; there can only be one.
Swift 5.2
iOS 13
Both master and detail view controllers are embedded in navigation controllers
let splitViewController = UISplitViewController()
splitViewController.delegate = self
let masterVC = MasterViewController()
let detailVC = DetailViewController()
let masterNavController = UINavigationController(rootViewController: masterVC)
let detailNavController = UINavigationController(rootViewController: detailVC)
splitViewController.viewControllers = [masterNavController,detailNavController]
You can put this code in your AppDelegate's (or in SceneDelegate if your target is iOS 13.0+)didFinishLaunchingWithOptions function. Just remember to make the splitViewController your rootViewController like this
self.window!.rootViewController = splitViewController
I had just met the same problem.
make sure that your child viewController of splitview can Autorotate to interface orientation.
you can change the function in your childViewController like this:
-(BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation {
return YES;
}
then the master view will be shown.