My hand-made debian package wont install if i build it on Squeeze (well, a squeezechroot)?
If i built it on a wheezy box though it builds installable packages.
Note that it builds fine in either case. Im generating the debian packages using CMake/CPack.
The error message i get is:
user#buildbox:/builddir/packagename# dpkg -i packagename_1.0.3.deb
(Reading database ... 35116 files and directories currently installed.)
Unpacking packagename (from packagename_1.0.3.deb) ...
dpkg: error processing packagename_1.0.3.deb (--install):
unable to create `/usr/share/packagename/builddir/mixer_devices.txt.dpkg-new' (while processing `./usr/share/packagename/builddir/mixer_devices.txt'): No such file or directory
dpkg-deb: subprocess paste killed by signal (Broken pipe)
Errors were encountered while processing:
packagename_1.0.3.deb
Might it be that mixer_devices is not contained within the created deb file for some reason?
Just do an ar x packagename_1.0.3.deb and see what the tar file contains.
Related
I'm trying to get involved in open source and also am quite interested in robotics, so I thought about contributing to MoveIt 2. As a first step, I'm installing MoveIt 2 from source on my Ubuntu 20.04 VM in VirtualBox.
I've run through all the instructions here: https://moveit.ros.org/install-moveit2/source/#:~:text=colcon%20build%20%2D%2Devent%2Dhandlers%20desktop_notification%2D%20status%2D%20%2D%2Dcmake%2Dargs%20%2DDCMAKE_BUILD_TYPE%3DRelease
However, the build is failing on the highlighted part. The error message is as follows:
Starting >>> geometric_shapes
--- stderr: geometric_shapes
CMake Error at CMakeLists.txt:47 (find_package):
By not providing "Findeigen3_cmake_module.cmake" in CMAKE_MODULE_PATH this
project has asked CMake to find a package configuration file provided by
"eigen3_cmake_module", but CMake did not find one.
Could not find a package configuration file provided by
"eigen3_cmake_module" with any of the following names:
eigen3_cmake_moduleConfig.cmake
eigen3_cmake_module-config.cmake
Add the installation prefix of "eigen3_cmake_module" to CMAKE_PREFIX_PATH
or set "eigen3_cmake_module_DIR" to a directory containing one of the above
files. If "eigen3_cmake_module" provides a separate development package or
SDK, be sure it has been installed.
---
Failed <<< geometric_shapes [1.20s, exited with code 1]
Summary: 0 packages finished [1.46s]
1 package failed: geometric_shapes
1 package had stderr output: geometric_shapes
33 packages not processed
Any help is really appreciated. Thanks!
You have to install ROS2 before building Move It 2. After installing the ROS2 binaries, the error doesn't occur.
I have searched the internet all weekend and cannot find anyone who has had a similar error. I am trying to install libapache-mod-factcgi but the package errors out and I cannot figure out why.
pi#applejacks:/tmp $ sudo apt-get source -b libapache2-mod-fastcgi
Reading package lists... Done
Building dependency tree
Reading state information... Done
Skipping already downloaded file 'libapache-mod-fastcgi_2.4.7~0910052141-1.1+deb8u1.dsc'
Skipping already downloaded file 'libapache-mod-fastcgi_2.4.7~0910052141.orig.tar.gz'
Skipping already downloaded file 'libapache-mod-fastcgi_2.4.7~0910052141-1.1+deb8u1.diff.gz'
Need to get 0 B of source archives.
Skipping unpack of already unpacked source in libapache-mod-fastcgi-2.4.7~0910052141
dpkg-buildpackage: source package libapache-mod-fastcgi
dpkg-buildpackage: source version 2.4.7~0910052141-1.1+deb8u1
dpkg-buildpackage: source distribution jessie
dpkg-buildpackage: source changed by Andreas Beckmann <anbe#debian.org>
dpkg-buildpackage: host architecture armhf
dpkg-source --before-build libapache-mod-fastcgi-2.4.7~0910052141
debian/rules clean
dh_listpackages: Please specify the compatibility level in debian/compat
dh_listpackages: Compatibility levels before 5 are no longer supported (level 1 requested)
/usr/share/cdbs/1/rules/dpatch.mk:33: CDBS WARNING: dpatch.mk is deprecated since 0.4.85 - please use source format 3.0 (quilt) instead
test -x debian/rules
rmdir /tmp/libapache-mod-fastcgi-2.4.7~0910052141/build-tmp
rmdir: failed to remove ‘/tmp/libapache-mod-fastcgi-2.4.7~0910052141/build-tmp’: No such file or directory
/usr/share/cdbs/1/rules/buildcore.mk:46: recipe for target 'cleanbuilddir' failed
make: [cleanbuilddir] Error 1 (ignored)
dh_clean
dh_clean: Please specify the compatibility level in debian/compat
/usr/share/cdbs/1/rules/debhelper.mk:189: recipe for target 'clean' failed
make: *** [clean] Error 2
dpkg-buildpackage: error: debian/rules clean gave error exit status 2
Build command 'cd libapache-mod-fastcgi-2.4.7~0910052141 && dpkg-buildpackage -b -uc' failed.
E: Child process failed
I'm trying to build Apache2 on RPi also. These commands got the .deb building for me:
cd libapache-mod-fastcgi-2.4.7~0910052141;
echo 10 > debian/compat;
dpkg-buildpackage -b -uc
Then cd .. to go one level up, then install the package with dpkg -i ./libapache2-mod-fastcgi_2.4.7~0910052141-1.1+deb8u1_armhf.deb
I did a apt-get upgrade because the load times of our production server were about 40 seconds. I don't have a snapshot before nor after the upgrade.(Although there is a snapshot of six months old) Load times improved to 15-ish seconds but our erizo service stopped working. Erizo was also running on that instance. Restarting the services didn't help so I tried upgrading the packages to the previous version (https://askubuntu.com/questions/138284/how-to-downgrade-a-package-via-apt-get), just like it was but on almost every package there was an error: the previous package version did not excist.(which is strange, because I copied the output of dpkg -l)
Only a few of them were successfully downgraded but I got a serious error when upgrading e1fslibs to it's previous version.:The following packages have unmet dependencies:
e2fsprogs: PreDepends: e2fslibs
Somehow that messed up initramfs and/or initramfs-tools and now the instance is running but I can't get into it.
Connecting to the instance in google cloud platform :Connecting...
Could not connect, retrying (1/3).
google cloud shell isn't able to gcloud compute ssh : Permission denied (publickey).
using gcloud locally also says Permission denied (publickey).
I checked the following:
There are project public keys defined; there aren't any instance public keys defined or any other metadata ( Google Cloud SSH Keys )
In google cloud platform >> compute engine >> VM instances >> permissions>> I see 'compute' is disabled
verify that the daemon is running by navigating to the serial console output page and looking for output lines prefixed with the accounts-from-metadata: string. If you are using a standard image but you do not see these output prefixes in the serial console output, the daemon might be stopped--> I don't see this so I expect it's NOT running.
check firewall rules:(gcloud compute firewall-rules list)
default-allow-ssh default 0.0.0.0/0 tcp:22 //rule is present
Following packages were upgraded:
apt
apt-transport-https
apt-utils
binutils
cloud-init
cloud-initramfs-growroot
cloud-initramfs-rescuevol
comerr-dev
dosfstools
e2fslibs
e2fsprogs
gce-cloud-config
gce-daemon
gce-imagebundle
gce-startup-scripts
google-cloud-sdk
landscape-client
landscape-common l
ibapt-inst1.4 libapt-pkg4.12
libcomerr2
libss2
libudev0 mountall
nginx
nginx-common
nginx-full
ntp
ntpdate
procps
python-apt
python-apt-common
python-lazr.restfulclient
udev
unattended-upgrades
update-manager-core
upstart
whoopsie
x11-utils
This is get from the serial output ::
- mountall: Event failed
- landscape-client is not configured, please run landscape-config.
What to do next?
Apply a startup script to running instance (following this https://cloud.google.com/compute/docs/startupscript) and try to perform Apt-get upgrade ?
try to create a new public key (again) in google cloud shell to access the instance?
In google cloud shell the first time this file was generated after typing gcloud compute --project "enduring-palace-762" ssh --zone "europe-west1-c" "tta-media-test-2"
WARNING: The private SSH key file for Google Compute Engine does not exist.WARNING: You do not have an SSH key for Google Compute Engine.WARNING: [/usr/bin/ssh-keygen] will be executed to generate a key. This tool needs to create the directory /home/developer/.ssh
the generated public key was stored in /home/developer/.ssh /google_compute_engine.pub I made a copy of that, prepended the username and added the content of the public key to compute engine >> metadata>>ssh keys. *key is accepted but the username doesn't show like it does with all the other username - key pairs
I get Permission denied (publickey) error though when using gcloud compute ssh tta-media-test-2 --zone europe-west1-c
When I provide the ssh key file like this
gcloud compute ssh tta-media-test-2 --zone europe-west1-c --ssh-key-file=my-ssh-keys_copy.pub (pwd is inside the folder where key file is)
WARNING: The public SSH key file for Google Compute Engine does not exist.
WARNING: You do not have an SSH key for Google Compute Engine.
WARNING: [/usr/bin/ssh-keygen] will be executed to generate a key.
I get same result when i generate a new key with ssh-keygen -t rsa -f my-ssh-keys
Any other possible solution would be much appreciated.
[update] I am able to ssh the 'broken' instance from local using ssh user#externalIpOfInstance My plan is to bring it to a upgraded stable state, create a snapshot and see from there..
sudo apt-get -f install
0 upgraded, 0 newly installed, 0 to remove and 5 not upgraded.
1 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Setting up initramfs-tools (0.99ubuntu13.5) ...
update-initramfs: deferring update (trigger activated)
Processing triggers for initramfs-tools ...
update-initramfs: Generating /boot/initrd.img-3.13.0-79-generic
E: /usr/share/initramfs-tools/hooks/fixrtc failed with return 1.
update-initramfs: failed for /boot/initrd.img-3.13.0-79-generic with 1.
dpkg: error processing initramfs-tools (--configure):
subprocess installed post-installation script returned error exit status 1
Errors were encountered while processing:
initramfs-tools
E: Sub-process /usr/bin/dpkg returned an error code (1)
sudo apt-get upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages have been kept back:
google-chrome-stable
The following packages will be upgraded:
comerr-dev libcomerr2 libss2 unattended-upgrades
4 upgraded, 0 newly installed, 0 to remove and 1 not upgraded.
1 not fully installed or removed.
Need to get 0 B/188 kB of archives.
After this operation, 4,096 B of additional disk space will be used.
Do you want to continue [Y/n]? y
Preconfiguring packages ...
(Reading database ... 178509 files and directories currently installed.)
Preparing to replace comerr-dev 2.1-1.42-1ubuntu2.2 (using .../comerr-dev_2.1-1.42-1ubuntu2.3_amd64.deb) ...
Unpacking replacement comerr-dev ...
Preparing to replace libcomerr2 1.42-1ubuntu2.2 (using .../libcomerr2_1.42-1ubuntu2.3_amd64.deb) ...
Unpacking replacement libcomerr2 ...
Preparing to replace libss2 1.42-1ubuntu2.2 (using .../libss2_1.42-1ubuntu2.3_amd64.deb) ...
Unpacking replacement libss2 ...
Preparing to replace unattended-upgrades 0.76ubuntu1.1 (using .../unattended-upgrades_0.76ubuntu1.2_all.deb) ...
Unpacking replacement unattended-upgrades ...
Processing triggers for install-info ...
Processing triggers for man-db ...
Processing triggers for ureadahead ...
Setting up initramfs-tools (0.99ubuntu13.5) ...
update-initramfs: deferring update (trigger activated)
Setting up libcomerr2 (1.42-1ubuntu2.3) ...
Setting up comerr-dev (2.1-1.42-1ubuntu2.3) ...
Setting up libss2 (1.42-1ubuntu2.3) ...
Setting up unattended-upgrades (0.76ubuntu1.2) ...
Processing triggers for initramfs-tools ...
update-initramfs: Generating /boot/initrd.img-3.13.0-79-generic
E: /usr/share/initramfs-tools/hooks/fixrtc failed with return 1.
update-initramfs: failed for /boot/initrd.img-3.13.0-79-generic with 1.
dpkg: error processing initramfs-tools (--configure):
subprocess installed post-installation script returned error exit status 1
No apport report written because MaxReports is reached already
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
Errors were encountered while processing:
initramfs-tools
E: Sub-process /usr/bin/dpkg returned an error code (1)
sudo apt-get remove initramfs-tools-bin
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
cron : Depends: adduser but it is not going to be installed
procps : Depends: initscripts
upstart : Depends: initscripts
Depends: mountall
Depends: ifupdown (>= 0.6.10ubuntu5)
E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages.
what to do here?
If you were able to SSH into the instance using a given SSH key before, the most likely reason it would stop working is if you somehow removed that SSH key or if the SSH daemon wasn't running/was otherwise broken. It appears as though in the downgrade you broke this machine.
Why do you need this particular VM instance? Does it have important data? If so, you can shut it off, mount its disk using a fresh VM instance, and copy that data off.
If it runs a service, you should probably cut over to a new machine: even if you're able to get into the instance, there's no telling what still works and what doesn't.
i'm facing issue in bigbluebutton insatllation
Reading state information...
You might want to run 'apt --fix-broken install' to correct these.
The following packages have unmet dependencies:
bigbluebutton : Depends: bbb-config but it is not going to be installed
gce-compute-image-packages : Depends: google-compute-engine but it is not going to be installed
E: Unmet dependencies. Try 'apt --fix-broken install' with no packages (or specify a solution).
I've seen here, that I should install mod_rpaf so that Apache will be able to detect the IPs coming from the Nginx reverse proxy.
Even seen that there is a bug on Ununtu SO, and it should be solved changing the first line on /etc/apache2/mods-available/rpaf.conf.
The first line contains <IfModule rpaf_module>. I've tried replacing with <IfModule mod_rpaf-2.0.c>, but nothing changes when I restart the Apache.
This is the output when I try to install this module:
apt-get install libapache2-mod-rpaf
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following NEW packages will be installed:
libapache2-mod-rpaf
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B/9,126 B of archives.
After this operation, 67.6 kB of additional disk space will be used.
Selecting previously unselected package libapache2-mod-rpaf.
(Reading database ... 28714 files and directories currently installed.)
Unpacking libapache2-mod-rpaf (from .../libapache2-mod-rpaf_0.6-2ubuntu1_amd64.deb) ...
Setting up libapache2-mod-rpaf (0.6-2ubuntu1) ...
Enabling module rpaf.
* Restarting web server apache2 [fail]
* The apache2 configtest failed.
Output of config test was:
apache2: Syntax error on line 140 of /etc/apache2/apache2.conf: Syntax error on line 1 of /etc/apache2/mods-enabled/rpaf.load: API module structure 'rpaf_module' in file /usr/lib/apache2/modules/mod_rpaf.so is garbled - expected signature 41503234 but saw 41503232 - perhaps this is not an Apache module DSO, or was compiled for a different Apache version?
Action 'configtest' failed.
The Apache error log may have more information.
invoke-rc.d: initscript apache2, action "restart" failed.
dpkg: error processing libapache2-mod-rpaf (--configure):
subprocess installed post-installation script returned error exit status 1
Errors were encountered while processing:
libapache2-mod-rpaf
E: Sub-process /usr/bin/dpkg returned an error code (1)
Per the error, you already have a version of /usr/lib/apache2/modules/mod_rpaf.so on your system with a filehash that differs from what the package config is expecting (expected signature 41503234 but saw 41503232), so you either need to:
1) Work out what installed the conflicting version and uninstall it:
dpkg -S /usr/lib/apache2/modules/mod_rpaf.so
apt-get --purge remove <package>
Or if manually added:
mv /usr/lib/apache2/modules/mod_rpaf.so /usr/lib/apache2/modules/mod_rpaf.so.bak
apt-get install libapache2-mod-rpaf
This may break other stuff.
2) Manually download, re-compile and install from source, should solve the immediate issue, but you'll hit the same conflicting signature issue if you try to update via apt.
3) Unpack the deb file, hack the hash in the config, repackage and install.
I'm trying to merge the Mono Runtime (v 3.0.4) with a MonoMac application, but since the upgrade to 3.0.4 (from 2.10.11) this fails with the following error:
Merging Mono Runtime into app bundle
/Applications/MonoDevelop-old.app/Contents/MacOS/lib/monodevelop/AddIns/MonoDevelop.MonoMac/mmp
-nolink "-minos=10.6.6"
-o "/Users/ted/Documents/XCode/Mac/StageTimer/StageTimer/bin/Release"
-n "StageTimer"
-a "/Library/Frameworks/Mono.framework/Versions/3.0.4/lib/mono/4.0/System.dll"
-a "/Library/Frameworks/Mono.framework/Versions/3.0.4/lib/mono/4.0/System.Xml.dll"
-a "/Library/Frameworks/Mono.framework/Versions/3.0.4/lib/mono/4.0/System.Core.dll"
-a "/Library/Frameworks/Mono.framework/Versions/3.0.4/lib/mono/4.0/System.Xml.Linq.dll"
-a "/Library/Frameworks/Mono.framework/Versions/3.0.4/lib/mono/4.0/System.Drawing.dll"
-a "/Applications/MonoDevelop-old.app/Contents/MacOS/lib/monodevelop/AddIns/MonoDevelop.MonoMac/MonoMac.dll"
"/Users/ted/Documents/XCode/Mac/StageTimer/StageTimer/bin/Release/StageTimer.exe"
Process exited with code 1, command:
pkg-config --variable=prefix mono-2
Unhandled Exception: System.IO.DirectoryNotFoundException: Directory '/lib/mono/4.0' not found.
Even if I configure MonoDevelop to use Mono 2.10.11 instead of 3.0.4 it fails with the same error (and path: '/lib/mono/4.0'). Next I also tried modifying the symlink in /Library/Frameworks/Mono.framework/Versions/Current to point to 2.10.11 but still the same error & path.
Anyone with mono & pkg-config skills that knows how to configure this?
Similar issue happened to F# compiler when one tried to run it alongside Mono 3.0.4 (instead of 3.0.3). The issue boils down to a bugfix in Mono that prevents conflicting the homebrew pkg-config set up. The workaround that was adopted in F# sources was to hardcode the path to Mono's pkg-config.
You could probably get the same result as this by just overriding the environment variable PKG_CONFIG_PATH when launching MonoDevelop, this way:
PKG_CONFIG_PATH=/path/were/mono/pc/files/are/in/Mac:$PKG_CONFIG_PATH monodevelop
The exact path must be somewhere underneath /Library/Frameworks/Mono.framework/Versions/Current/ , just look out for files with .pc extension.