I just downloaded the free trial of Bamboo continuous integration server, and created the first plan with nothing but downloading the source code from the git. I have a local git repository on the bamboo machine so the git URL is pointing to a local path.
The problem is that when I run the job, it never finishes even after waiting for an hour. This is the last lines of the activity log:
07-Apr-2011 20:03:23 Checking out revision f9dc82500914333ed4bbdae5ed038771fd658c3c.
07-Apr-2011 20:03:23 Creating local git repository in '/home/bob/bamboo-home/xml-data/build-dir/DEV-DEV-1/.git'.
From the shell I can go to the directory shown in the log and see that the source code were cloned correctly to the bamboo working directory. But the job will never finish and the log will not have any more update from here. I have to manually terminate the job. Any ideas? Do I miss something?
Just a guess, since the Bamboo instance we have at work pulls from Accurev and not Git, and I've never run into this problem myself - but it may be hung because there isn't a builder defined for that plan. You might try defining a builder (even if it's one that you know will fail) just to see if it makes it to that next step.
I had very similar problem.
It's not very original solution but I just uninstalled bamboo and installed it again.. Now it works now
Related
I am testing Odoo.sh, trying to run an Odoo 15 Enterprise. I read all the documentation and see several webinars about it, but I am not able to run an instance with any OCA module.
To do that, I followed these steps:
In the Odoo.sh interface, I created a new branch in the Development category, forking from main branch (the one in the Production category). Note: the main branch is the one created by default by Odoo.sh, I didn't make any modification on it and in fact it works OK, I can connect to it.
Also in the Odoo.sh interface, I clicked on the button Submodule and then on Run on Odoo.sh. In the opened pop-up, I added the OCA repository l10n-spain, (version 15.0 of course). The repository works perfectly in a local server. In fact you can try with other OCA repository, the result is going to be the same.
After doing that, Odoo.sh adds the repo to the project with a new [ADD] commit, and tries to make a build of it. However, the tests always fail.
If I go to the log, first, in the install.log section, I can see errors with Pip libraries, so I open a shell and try to fix them, with pip3 check and then adjusting the versions of the libraries it complains of.
After that, when I try to connect to the new build, the odoo.log starts being filled but also with errors, particularly this one:
WARNING xxx odoo.addons.base.models.ir_cron: Tried to poll an undefined table on database xxx.
ERROR xxx odoo.sql_db: bad query:
SELECT latest_version
FROM ir_module_module
WHERE name='base'
ERROR: relation "ir_module_module" does not exist
LINE 3: FROM ir_module_module
^
This error uses to appear when you do a wrong installation of Odoo, but the installation is done by Odoo.sh, so... how can I fix this?
Does anyone experienced the same? Any ideas? May be the Python libraries are the problem?
One problem can be that the requirements file brokest the installation. odoo.sh tries to install it automatically, and because odoo.sh is using outdated python modules, the installation usually breaks.
https://github.com/OCA/l10n-spain/blob/15.0/requirements.txt
You can try to copy the required modules directly to your repository.
Well, in the end I managed to connect to the build after open a shell and writing these commands:
odoosh-restart http
odoo-update all
Still didn't check which of them did the trick.
I use github action to deploy my website to my server. The last ssh cmd is npm run start. It will output ready - started server on http://localhost:4000(Since i use Nextjs) finally but it seems that github doesn't know what did it mean and print :
2021/01/09 14:24:14 Error: command timeout
err: Run Command Timeout!
Although the website is successfully deployed, it shows that the Github action failed to execute.
So how to tell github action that the job had done successfully？
You should find a way to start the application in a daemon process of its own, rather than as a process within the SSH session. Perhaps this tool (pm2) might solve your problem? This question and answer is somewhat related.
There are definitely other ways to start your app in a daemon process, or perhaps as a service, but this might be the most straightforward for you since it's a Node tool.
Steps to reproduce are very easy.
Create a Dockerfile.
My Dockerfile has many more lines, but I have trimmed them so we can focus in the source of the problem.
Said that, these two lines alone (without anything more) show the problem.
FROM microsoft/iis
SHELL ["powershell", "-Command", "$ErrorActionPreference = 'Stop'; $ProgressPreference = 'SilentlyContinue'; $VerbosePreference = 'Continue'; "]
Run docker build . and you get hcsshim::PrepareLayer - failed failed in Win32: Función incorrecta. (0x1).
Windows 10 Pro 1909 (but it happened too in 1903)
Docker version: 2.1.0.5
Engine: 19.03.5
Machine: 0.16.2
I have found the solution to the problem.
Reading all the https://github.com/docker/for-win/issues/3884 bug, some have found a simple solution: rename C:\windows\system32\driver\cbfsconnect2017.sys so it isn't loaded the next boot.
Disabling that driver enables me to do a docker build for the first time in windows containers in almost a year.
In my case Box Sync was the one using that driver.
EDIT: #GustavoTM have found that pCloud raises the same problem.
EDIT2: #VonC have noticed that some people in the issue in GitHub has solved it deleting this other file: C:\Windows\System32\drivers\cbfs6.sys. I haven't tried that, but i put it if it helps others.
The good thing is that I don't need to uninstall Box, but only rename that file.
This is still an issue (still open) with Win10.
Looks like uninstalling cloud storage providers with file system filters like Dropbox, Box, etc. as a workaround is an option for some users.
Deinstall cloud storage providers or virus scanners; if you identify which one is not working please share in https://github.com/docker/for-win/issues/3884
In my case was the problem similar but the file cbfs6.sys was placed somewhere in the rest of uninstalled application Jungle disk, somewhere in the folder c:\Program files\Jungle disk .... It's part of Callback File System signed by EldoS Corporation.
The folder could be rename only and not delete directly. So I could delete its immediately after the PC restart, before running the Docker. So it could be delete during the Docker service restart too.
I have started to work with gitlab ci and I am still new to CI in general. I currently want to call a script after a successful test build of my master branch. This script will notify my server to do a pull, build and restart.
I can not use kubernetes or docker, as the project lead doesn't want to use them.
I can do the scipt and such, but the gitlab ci config documentation is confusing and I cant seem to find an option on how to call the script after it finished.
Stupid of me asking. Its as simple as defining a new stage after the last stage and call the script there.
If you want to do a simple task at the end of a pipeline, try the after_script directive. There is also a before_script counterpart.
Docs at:
https://docs.gitlab.com/ee/ci/yaml/#after_script
https://docs.gitlab.com/ee/ci/yaml/#before_script
It seems that I've run out of room on my Master node and I need to clear some space in order to reboot my daily tests. Selenium.log is taking up a lot of space and I'm convinced its not currently being used. Would it be safe to delete?
Edit: I deleted the file and upon starting a new build Selenium created a new log file. I didn't experience any issues during this new build either.
You don't say what creates the file, or where it is, but assuming that you can already see the important details from each build in the Jenkins UI (e.g. in the console log, or in test results etc.), then you shouldn't need to keep any files that are sitting in the workspace or elsewhere.