Related
This article describes an approach to OOP I find interesting:
What if objects exist as
encapsulations, and the communicate
via messages? What if code re-use has
nothing to do with inheritance, but
uses composition, delegation, even
old-fashioned helper objects or any
technique the programmer deems fit?
The ontology does not go away, but it
is decoupled from the implementation.
The idea of reuse without inheritance or dependence to a class hierarchy is what I found most astounding, but how feasible is this?
Examples were given but I can't quite see how I can change my current code to adapt this approach.
So how feasible is this approach? Or is there really not a need for changing code but rather a scenario-based approach where "use only when needed or optimal"?
EDIT: oops, I forgot the link: here it is link
I'm sure you've heard of "always prefer composition over inheritance".
The basic idea of this premise is multiple objects with different functionalities are put together to create one fully-featured object. This should be preferred over inheriting functionality from disparate objects that have nothing to do with each other.
The main argument regarding this is contained in the definition of the Liskov Substitution Principle and playfully illustrated by this poster:
If you had a ToyDuck object, which object should you inherit from, from a purely inheritance standpoint? Should you inherit from Duck? No -- most likely you should inherit from Toy.
Bottomline is you should be using the correct method of abstraction -- whether inheritance or composition -- for your code.
For your current objects, consider if there are objects that ought to be removed from the inheritance tree and included merely as a property that you can call and invoke.
Inheritance is not well suited for code reuse. Inheriting for code reuse usually leads to:
Classes with inherited methods that must not be called on them (violating the Liskov substitution principle), which confuses programmers and leads to bugs.
Deep hierarchies where it takes inordinate amount of time to find the method you need when it can be declared anywhere in dozen or more classes.
Generally the inheritance tree should not get more than two or three levels deep and usually you should only inherit interfaces and abstract base classes.
There is however no point in rewriting existing code just for sake of it. However when you need to modify, try to switch to composition where possible. That will usually allow you to modify the code in smaller pieces, since there will be less coupling between the classes.
I just skimmed the text over, but it seems to say what OO design was always about: Inheritance is not meant as a code reuse tool and loose coupling is good. This has been written dozens times before, see the linked references on the article bottom. This does not mean you should skip inheritance entirely, you just have to use it conciously and only when it makes sense. The article also states this.
As for the duck typing, I find the examples and thoughts questionable. Like this one:
function good (foo) {
if ( !foo.baz || !foo.quux ) {
throw new TypeError("We need foo to have baz and quux methods.");
}
return foo.baz(foo.quux(10));
}
What’s the point in adding three new lines just to report an error that would be reported by the runtime automatically?
Inheritance is fundamental
no inheritance, no OOP.
prototyping and delegation can be used to effect inheritance (like in JavaScript), which is fine, and is functionally equivalent to inheritance
objects, messages, and composition but no inheritance is object-based, not object-oriented. VB5, not Java. Yes it can be done; plan on writing a lot of boilerplate code to expose interfaces and forward operations.
Those that insist inheritance is unnecessary, or that it is 'bad' are creating strawmen: it is easy to imagine scenarios where inheritance is used badly; this is not a reflection on the tool, but on the tool-user.
I have a very limited understanding of OOP.
I've been programming in .Net for a year or so, but I'm completely self taught so some of the uses of the finer points of OOP are lost on me.
Encapsulation, inheritance, abstraction, etc. I know what they mean (superficially), but what are their uses?
I've only ever used OOP for putting reusable code into methods, but I know I am missing out on a lot of functionality.
Even classes -- I've only made an actual class two or three times. Rather, I typically just include all of my methods with the MainForm.
OOP is way too involved to explain in a StackOverflow answer, but the main thrust is as follows:
Procedural programming is about writing code that performs actions on data. Object-oriented programming is about creating data that performs actions on itself.
In procedural programming, you have functions and you have data. The data is structured but passive and you write functions that perform actions on the data and resources.
In object-oriented programming, data and resources are represented by objects that have properties and methods. Here, the data is no longer passive: method is a means of instructing the data or resource to perform some action on itself.
The reason that this distinction matters is that in procedural programming, any data can be inspected or modified in any arbitrary way by any part of the program. You have to watch out for unexpected interactions between different functions that touch the same data, and you have to modify a whole lot of code if you choose to change how the data is stored or organized.
But in object-oriented programming, when encapsulation is used properly, no code except that inside the object needs to know (and thus won't become dependent on) how the data object stores its properties or mutates itself. This helps greatly to modularize your code because each object now has a well-defined interface, and so long as it continues to support that interface and other objects and free functions use it through that interface, the internal workings can be modified without risk.
Additionally, the concepts of objects, along with the use of inheritance and composition, allow you to model your data structurally in your code. If you need to have data that represents an employee, you create an Employee class. If you need to work with a printer resource, you create a Printer class. If you need to draw pushbuttons on a dialog, you create a Button class. This way, not only do you achieve greater modularization, but your modules reflect a useful model of whatever real-world things your program is supposed to be working with.
You can try this: http://homepage.mac.com/s_lott/books/oodesign.html It might help you see how to design objects.
You must go though this I can't create a clear picture of implementing OOP concepts, though I understand most of the OOP concepts. Why?
I had same scenario and I too is a self taught. I followed those steps and now I started getting a knowledge of implementation of OOP. I make my code in a more modular way better structured.
OOP can be used to model things in the real world that your application deals with. For example, a video game will probably have classes for the player, the badguys, NPCs, weapons, ammo, etc... anything that the system wants to deal with as a distinct entity.
Some links I just found that are intros to OOD:
http://accu.informika.ru/acornsig/public/articles/ood_intro.html
http://www.fincher.org/tips/General/SoftwareEngineering/ObjectOrientedDesign.shtml
http://www.softwaredesign.com/objects.html
Keeping it very brief: instead of doing operations on data a bunch of different places, you ask the object to do its thing, without caring how it does it.
Polymorphism: different objects can do different things but give them the same name, so that you can just ask any object (of a particular supertype) to do its thing by asking any object of that type to do that named operation.
I learned OOP using Turbo Pascal and found it immediately useful when I tried to model physical objects. Typical examples include a Circle object with fields for location and radius and methods for drawing, checking if a point is inside or outside, and other actions. I guess, you start thinking of classes as objects, and methods as verbs and actions. Procedural programming is like writing a script. It is often linear and it follows step by step what needs to be done. In OOP world you build an available repetoire of actions and tasks (like lego pieces), and use them to do what you want to do.
Inheritance is used common code should/can be used on multiple objects. You can easily go the other way and create way too many classes for what you need. If I am dealing with shapes do I really need two different classes for rectangles and squares, or can I use a common class with different values (fields).
Mastery comes with experience and practice. Once you start scratching your head on how to solve particular problems (especially when it comes to making your code usable again in the future), slowly you will gain the confidence to start including more and more OOP features into your code.
Good luck.
This is more of a subjective question, so I'm going to preemptively mark it as community wiki.
Basically, I've found that in most of my code, there are many classes, many of which use each other, but few of which are directly related to each other. I look back at my college days, and think of the traditional class Cat : Animal type examples, where you have huge inheritance trees, but I see none of this in my code. My class diagrams look like giant spiderwebs, not like nice pretty trees.
I feel I've done a good job of separating information logically, and recently I've done a good job of isolating dependencies between classes via DI/IoC techniques, but I'm worried I might be missing something. I do tend to clump behavior in interfaces, but I simply don't subclass.
I can easily understand subclassing in terms of the traditional examples such as class Dog : Animal or class Employee : Person, but I simply don't have anything that obvious I'm dealing with. And things are rarely as clear-cut as class Label : Control. But when it comes to actually modeling real entities in my code as a hierarchy, I have no clue where to begin.
So, I guess my questions boil down to this:
Is it ok to simply not subclass or inherit? Should I be concerned at all?
What are some strategies you have to determine objects that could benefit from inheritance?
Is it acceptable to always inherit based on behavior (interfaces) rather than the actual type?
Inheritance should always represent an "is-a" relationship. You should be able to say "A is a B" if A derives from B. If not, prefer composition. It's perfectly fine to not subclass when it is not necessary.
For example, saying that FileOpenDialog "is-a" Window makes sense, but saying that an Engine "is-a" Car is nonsense. In that case, an instance of Engine inside a Car instance is more appropriate (It can be said that Car "is-implemented-in-terms-of" Engine).
For a good discussion of inheritance, see Part 1 and Part 2 of "Uses and Abuses of Inheritance" on gotw.ca.
As long as you do not miss the clear cut 'is a' relationships, it's ok and in fact, it's best not to inherit, but to use composition.
is-a is the litmus test. if (Is X a Y?) then class X : Y { } else class X { Y myY; } or class Y { X myX; }
Using interfaces, that is, inheriting behavior, is a very neat way to structure the code via adding only the needed behavior and no other. The tricky part is defining those interfaces well.
No technology or pattern should be used for its own sake. You obviously work in a domain where classes tend to not benefit from inheritance, so you shouldn't use inheritance.
You've used DI to keep things neat and clean. You separated the concerns of your classes. Those are all good things. Don't try and force inheritance if you don't really need it.
An interesting follow-up to this question would be: Which programming domains do tend to make good use of inheritance? (UI and db frameworks have already been mentioned and are great examples. Any others?)
I also hate the Dog -> Mammal -> Animal examples, precisely because they do not occur in real life.
I use very little subclassing, because it tightly couples the subclass to the superclass and makes your code really hard to read. Sometimes implementation inheritance is useful (e.g. PostgreSQLDatabaseImpl and MySQLDatabaseImpl extend AbstractSQLDatabase), but most of the time it just makes a mess of things. Most of the time I see subclasses the concept has been misused and either interfaces or a property should be used.
Interfaces, however, are great and you should use those.
Generally, favour composition over inheritance. Inheritance tends to break encapsulation. e.g. If a class depends on a method of a super class and the super class changes the implementation of that method in some release, the subclass may break.
At times when you are designing a framework, you will have to design classes to be inherited. If you want to use inheritance, you will have to document and design for it carefully. e.g. Not calling any instance methods (that could be overridden by your subclasses) in the constructor. Also if its a genuine 'is-a' relationship, inheritance is useful but is more robust if used within a package.
See Effective Java (Item 14, and 15). It gives a great argument for why you should favour composition over inheritance. It talks about inheritance and encapsulation in general (with java examples). So its a good resource even if you are not using java.
So to answer your 3 questions:
Is it ok to simply not subclass or inherit? Should I be concerned at all?
Ans: Ask yourself the question is it a truly "is-a" relationship? Is decoration possible? Go for decoration
// A collection decorator that is-a collection with
public class MyCustomCollection implements java.util.Collection {
private Collection delegate;
// decorate methods with custom code
}
What are some strategies you have to determine objects that could benefit from inheritance?
Ans: Usually when you are writing a framework, you may want to provide certain interfaces and "base" classes specifically designed for inheritance.
Is it acceptable to always inherit based on behavior (interfaces) rather than the actual type?
Ans: Mostly yes, but you'd be better off if the super class is designed for inheritance and/or under your control. Or else go for composition.
IMHO, you should never do #3, unless you're building an abstract base class specifically for that purpose, and its name makes it clear what its purpose is:
class DataProviderBase {...}
class SqlDataProvider : DataProviderBase {...}
class DB2DataProvider : DataProviderBase {...}
class AccountDataProvider : SqlDataProvider {...}
class OrderDataProvider : SqlDataProvider {...}
class ShippingDataProvider : DB2DataProvider {...}
etc.
Also following this type of model, sometimes if you provide an interface (IDataProvider) it's good to also provide a base class (DataProviderBase) that future consumers can use to conveniently access logic that's common to all/most DataProviders in your application model.
As a general rule, though, I only use inheritance if I have a true "is-a" relationship, or if it will improve the overall design for me to create an "is-a" relationship (provider model, for instance.)
Where you have shared functionality, programming to the interface is more important than inheritance.
Essentially, inheritance is more about relating objects together.
Most of the time we are concerned with what an object can DO, as opposed to what it is.
class Product
class Article
class NewsItem
Are the NewsItem and Article both Content items? Perhaps, and you may find it useful to be able to have a list of content which contains both Article items and NewsItem items.
However, it's probably more likely you'll have them implement similar interfaces. For example, IRssFeedable could be an interface that they both implement. In fact, Product could also implement this interface.
Then they can all be thrown to an RSS Feed easily to provide lists of things on your web page. This is a great example when the interface is important whereas the inheritance model is perhaps less useful.
Inheritance is all about identifying the nature of Objects
Interfaces are all about identifying what Objects can DO.
My class hierarchies tend to be fairly flat as well, with interfaces and composition providing the necessary coupling. Inheritance seems to pop up mostly when I'm storing collections of things, where the different kinds of things will have data/properties in common. Inheritance often feels more natural to me when there is common data, whereas interfaces are a very natural way to express common behavior.
The answer to each of your 3 questions is "it depends". Ultimately it will all depend on your domain and what your program does with it. A lot of times, I find the design patterns I choose to use actually help with finding points where inheritance works well.
For example, consider a 'transformer' used to massage data into a desired form. If you get 3 data sources as CSV files, and want to put them into three different object models (and maybe persist them into a database), you could create a 'csv transformer' base and then override some methods when you inherit from it in order to handle the different specific objects.
'Casting' the development process into the pattern language will help you find objects/methods that behave similarly and help in reducing redundant code (maybe through inheritance, maybe through the use of shared libraries - whichever suits the situation best).
Also, if you keep your layers separate (business, data, presentation, etc.), your class diagram will be simpler, and you could then 'visualize' those objects that aught to be inherited.
I wouldn't get too worried about how your class diagram looks, things are rarely like the classroom...
Rather ask yourself two questions:
Does your code work?
Is it extremely time consuming to maintain? Does a change sometimes require changing the 'same' code in many places?
If the answer to (2) is yes, you might want to look at how you have structured your code to see if there is a more sensible fashion, but always bearing in mind that at the end of the day, you need to be able to answer yes to question (1)... Pretty code that doesn't work is of no use to anybody, and hard to explain to the management.
IMHO, the primary reason to use inheritance is to allow code which was written to operate upon a base-class object to operate upon a derived-class object instead.
I must confess I'm somewhat of an OOP skeptic. Bad pedagogical and laboral experiences with object orientation didn't help. So I converted into a fervent believer in Visual Basic (the classic one!).
Then one day I found out C++ had changed and now had the STL and templates. I really liked that! Made the language useful. Then another day MS decided to apply facial surgery to VB, and I really hated the end result for the gratuitous changes (using "end while" instead of "wend" will make me into a better developer? Why not drop "next" for "end for", too? Why force the getter alongside the setter? Etc.) plus so much Java features which I found useless (inheritance, for instance, and the concept of a hierarchical framework).
And now, several years afterwards, I find myself asking this philosophical question: Is inheritance really needed?
The gang-of-four say we should favor object composition over inheritance. And after thinking of it, I cannot find something you can do with inheritance you cannot do with object aggregation plus interfaces. So I'm wondering, why do we even have it in the first place?
Any ideas? I'd love to see an example of where inheritance would be definitely needed, or where using inheritance instead of composition+interfaces can lead to a simpler and easier to modify design. In former jobs I've found if you need to change the base class, you need to modify also almost all the derived classes for they depended on the behaviour of parent. And if you make the base class' methods virtual... then not much code sharing takes place :(
Else, when I finally create my own programming language (a long unfulfilled desire I've found most developers share), I'd see no point in adding inheritance to it...
Really really short answer: No. Inheritance is not needed because only byte code is truly needed. But obviously, byte code or assemble is not a practically way to write your program. OOP is not the only paradigm for programming. But, I digress.
I went to college for computer science in the early 2000s when inheritance (is a), compositions (has a), and interfaces (does a) were taught on an equal footing. Because of this, I use very little inheritance because it is often suited better by composition. This was stressed because many of the professors had seen bad code (along with what you have described) because of abuse of inheritance.
Regardless of creating a language with or without inheritances, can you create a programming language which prevents bad habits and bad design decisions?
I think asking for situations where inheritance is really needed is missing the point a bit. You can fake inheritance by using an interface and some composition. This doesnt mean inheritance is useless. You can do anything you did in VB6 in assembly code with some extra typing, that doesn't mean VB6 was useless.
I usually just start using an interface. Sometimes I notice I actually want to inherit behaviour. That usually means I need a base class. It's that simple.
Inheritance defines an "Is-A" relationship.
class Point( object ):
# some set of features: attributes, methods, etc.
class PointWithMass( Point ):
# An additional feature: mass.
Above, I've used inheritance to formally declare that PointWithMass is a Point.
There are several ways to handle object P1 being a PointWithMass as well as Point. Here are two.
Have a reference from PointWithMass object p1 to some Point object p1-friend. The p1-friend has the Point attributes. When p1 needs to engage in Point-like behavior, it needs to delegate the work to its friend.
Rely on language inheritance to assure that all features of Point are also applicable to my PointWithMass object, p1. When p1 needs to engage in Point-like behavior, it already is a Point object and can just do what needs to be done.
I'd rather not manage the extra objects floating around to assure that all superclass features are part of a subclass object. I'd rather have inheritance to be sure that each subclass is an instance of it's own class, plus is an instance of all superclasses, too.
Edit.
For statically-typed languages, there's a bonus. When I rely on the language to handle this, a PointWithMass can be used anywhere a Point was expected.
For really obscure abuse of inheritance, read about C++'s strange "composition through private inheritance" quagmire. See Any sensible examples of creating inheritance without creating subtyping relations? for some further discussion on this. It conflates inheritance and composition; it doesn't seem to add clarity or precision to the resulting code; it only applies to C++.
The GoF (and many others) recommend that you only favor composition over inheritance. If you have a class with a very large API, and you only want to add a very small number of methods to it, leaving the base implementation alone, I would find it inappropriate to use composition. You'd have to re-implement all of the public methods of the encapsulated class to just return their value. This is a waste of time (programmer and CPU) when you can just inherit all of this behavior, and spend your time concentrating on new methods.
So, to answer your question, no you don't absolutely need inheritance. There are, however, many situations where it's the right design choice.
The problem with inheritance is that it conflates the issue of sub-typing (asserting an is-a relationship) and code reuse (e.g., private inheritance is for reuse only).
So, no it's an overloaded word that we don't need. I'd prefer sub-typing (using the 'implements' keyword) and import (kinda like Ruby does it in class definitions)
Inheritance lets me push off a whole bunch of bookkeeping onto the compiler because it gives me polymorphic behavior for object hierarchies that I would otherwise have to create and maintain myself. Regardless of how good a silver bullet OOP is, there will always be instances where you want to employ a certain type of behavior because it just makes sense to do. And ultimately, that's the point of OOP: it makes a certain class of problems much easier to solve.
The downsides of composition is that it may disguise the relatedness of elements and it may be harder for others to understand. With,say, a 2D Point class and the desire to extend it to higher dimensions, you would presumably have to add (at least) Z getter/setter, modify getDistance(), and maybe add a getVolume() method. So you have the Objects 101 elements: related state and behavior.
A developer with a compositional mindset would presumably have defined a getDistance(x, y) -> double method and would now define a getDistance(x, y, z) -> double method. Or, thinking generally, they might define a getDistance(lambdaGeneratingACoordinateForEveryAxis()) -> double method. Then they would probably write createTwoDimensionalPoint() and createThreeDimensionalPoint() factory methods (or perhaps createNDimensionalPoint(n) ) that would stitch together the various state and behavior.
A developer with an OO mindset would use inheritance. Same amount of complexity in the implementation of domain characteristics, less complexity in terms of initializing the object (constructor takes care of it vs. a Factory method), but not as flexible in terms of what can be initialized.
Now think about it from a comprehensibility / readability standpoint. To understand the composition, one has a large number of functions that are composed programmatically inside another function. So there's little in terms of static code 'structure' (files and keywords and so forth) that makes the relatedness of Z and distance() jump out. In the OO world, you have a great big flashing red light telling you the hierarchy. Additionally, you have an essentially universal vocabulary to discuss structure, widely known graphical notations, a natural hierarchy (at least for single inheritance), etc.
Now, on the other hand, a well-named and constructed Factory method will often make explicit more of the sometimes-obscure relationships between state and behavior, since a compositional mindset facilitates functional code (that is, code that passes state via parameters, not via this ).
In a professional environment with experienced developers, the flexibility of composition generally trumps its more abstract nature. However, one should never discount the importance of comprehensibility, especially in teams that have varying degrees of experience and/or high levels of turnover.
Inheritance is an implementation decision. Interfaces almost always represent a better design, and should usually be used in an external API.
Why write a lot of boilerplate code forwarding method calls to a composed member object when the compiler will do it for you with inheritance?
This answer to another question summarises my thinking pretty well.
Does anyone else remember all of the OO-purists going ballistic over the COM implementation of "containment" instead of "inheritance?" It achieved essentially the same thing, but with a different kind of implementation. This reminds me of your question.
I strictly try to avoid religious wars in software development. ("vi" OR "emacs" ... when everybody knows its "vi"!) I think they are a sign of small minds. Comp Sci Professors can afford to sit around and debate these things. I'm working in the real world and could care less. All of this stuff are simply attempts at giving useful solutions to real problems. If they work, people will use them. The fact that OO languages and tools have been commercially available on a wide scale for going on 20 years is a pretty good bet that they are useful to a lot of people.
There are a lot of features in a programming language that are not really needed. But they are there for a variety of reasons that all basically boil down to reusability and maintainability.
All a business cares about is producing (quality of course) cheaply and quickly.
As a developer you help do this is by becoming more efficient and productive. So you need to make sure the code you write is easily reusable and maintainable.
And, among other things, this is what inheritance gives you - the ability to reuse without reinventing the wheel, as well as the ability to easily maintain your base object without having to perform maintenance on all similar objects.
There's lots of useful usages of inheritance, and probably just as many which are less useful. One of the useful ones is the stream class.
You have a method that should be able stream data. By using the stream base class as input to the method you ensure that your method can be used to write to many kinds of streams without change. To the file system, over the network, with compression, etc.
No.
for me, OOP is mostly about encapsulation of state and behavior and polymorphism.
and that is. but if you want static type checking, you'll need some way to group different types, so the compiler can check while still allowing you to use new types in place of another, related type. creating a hierarchy of types lets you use the same concept (classes) for types and for groups of types, so it's the most widely used form.
but there are other ways, i think the most general would be duck typing, and closely related, prototype-based OOP (which isn't inheritance in fact, but it's usually called prototype-based inheritance).
Depends on your definition of "needed". No, there is nothing that is impossible to do without inheritance, although the alternative may require more verbose code, or a major rewrite of your application.
But there are definitely cases where inheritance is useful. As you say, composition plus interfaces together cover almost all cases, but what if I want to supply a default behavior? An interface can't do that. A base class can. Sometimes, what you want to do is really just override individual methods. Not reimplement the class from scratch (as with an interface), but just change one aspect of it. or you may not want all members of the class to be overridable. Perhaps you have only one or two member methods you want the user to override, and the rest, which calls these (and performs validation and other important tasks before and after the user-overridden methods) are specified once and for all in the base class, and can not be overridden.
Inheritance is often used as a crutch by people who are too obsessed with Java's narrow definition of (and obsession with) OOP though, and in most cases I agree, it's the wrong solution, as if the deeper your class hierarchy, the better your software.
Inheritance is a good thing when the subclass really is the same kind of object as the superclass. E.g. if you're implementing the Active Record pattern, you're attempting to map a class to a table in the database, and instances of the class to a row in the database. Consequently, it is highly likely that your Active Record classes will share a common interface and implementation of methods like: what is the primary key, whether the current instance is persisted, saving the current instance, validating the current instance, executing callbacks upon validation and/or saving, deleting the current instance, running a SQL query, returning the name of the table that the class maps to, etc.
It also seems from how you phrase your question that you're assuming that inheritance is single but not multiple. If we need multiple inheritance, then we have to use interfaces plus composition to pull off the job. To put a fine point about it, Java assumes that implementation inheritance is singular and interface inheritance can be multiple. One need not go this route. E.g. C++ and Ruby permit multiple inheritance for your implementation and your interface. That said, one should use multiple inheritance with caution (i.e. keep your abstract classes virtual and/or stateless).
That said, as you note, there are too many real-life class hierarchies where the subclasses inherit from the superclass out of convenience rather than bearing a true is-a relationship. So it's unsurprising that a change in the superclass will have side-effects on the subclasses.
Not needed, but usefull.
Each language has got its own methods to write less code. OOP sometimes gets convoluted, but I think that is the responsability of the developers, the OOP platform is usefull and sharp when it is well used.
I agree with everyone else about the necessary/useful distinction.
The reason I like OOP is because it lets me write code that's cleaner and more logically organized. One of the biggest benefits comes from the ability to "factor-up" logic that's common to a number of classes. I could give you concrete examples where OOP has seriously reduced the complexity of my code, but that would be boring for you.
Suffice it to say, I heart OOP.
Absolutely needed? no,
But think of lamps. You can create a new lamp from scratch each time you make one, or you can take properties from the original lamp and make all sorts of new styles of lamp that have the same properties as the original, each with their own style.
Or you can make a new lamp from scratch or tell people to look at it a certain way to see the light, or , or, or
Not required, but nice :)
Thanks to all for your answers. I maintain my position that, strictly speaking, inheritance isn't needed, though I believe I found a new appreciation for this feature.
Something else: In my job experience, I have found inheritance leads to simpler, clearer designs when it's brought in late in the project, after it's noticed a lot of the classes have much commonality and you create a base class. In projects where a grand-schema was created from the very beginning, with a lot of classes in an inheritance hierarchy, refactoring is usually painful and dificult.
Seeing some answers mentioning something similar makes me wonder if this might not be exactly how inheritance's supposed to be used: ex post facto. Reminds me of Stepanov's quote: "you don't start with axioms, you end up with axioms after you have a bunch of related proofs". He's a mathematician, so he ought to know something.
The biggest problem with interfaces is that they cannot be changed. Make an interface public, then change it (add a new method to it) and break million applications all around the world, because they have implemented your interface, but not the new method. The app may not even start, a VM may refuse to load it.
Use a base class (not abstract) other programmers can inherit from (and override methods as needed); then add a method to it. Every app using your class will still work, this method just won't be overridden by anyone, but since you provide a base implementation, this one will be used and it may work just fine for all subclasses of your class... it may also cause strange behavior because sometimes overriding it would have been necessary, okay, might be the case, but at least all those million apps in the world will still start up!
I rather have my Java application still running after updating the JDK from 1.6 to 1.7 with some minor bugs (that can be fixed over time) than not having it running it at all (forcing an immediate fix or it will be useless to people).
//I found this QA very useful. Many have answered this right. But i wanted to add...
1: Ability to define abstract interface - E.g., for plugin developers. Of course, you can use function pointers, but this is better and simpler.
2: Inheritance helps model types very close to their actual relationships. Sometimes a lot of errors get caught at compile time, because you have the right type hierarchy. For instance, shape <-- triangle (lets say there is a lot of code to be reused). You might want to compose triangle with a shape object, but shape is an incomplete type. Inserting dummy implementations like double getArea() {return -1;} will do, but you are opening up room for error. That return -1 can get executed some day!
3: void func(B* b); ... func(new D()); Implicit type conversion gives a great notational convenience since Derived is Base. I remember having read Straustrup saying that he wanted to make classes first class citizens just like fundamental data types (hence overloading operators etc). Implicit conversion from Derived to Base, behaves just like an implicit conversion from a data type to broader compatible one (short to int).
Inheritance and Composition have their own pros and cons.
Refer to this related SE question on pros of inheritance and cons of composition.
Prefer composition over inheritance?
Have a look at the example in this documentation link:
The example shows different use cases of overriding by using inheritance as a mean to achieve polymorphism.
In the following, inheritance is used to present a particular property for all of several specific incarnations of the same type thing. In this case, the GeneralPresenation has a properties that are relevant to all "presentation" (the data passed to an MVC view). The Master Page is the only thing using it and expects a GeneralPresentation, though the specific views expect more info, tailored to their needs.
public abstract class GeneralPresentation
{
public GeneralPresentation()
{
MenuPages = new List<Page>();
}
public IEnumerable<Page> MenuPages { get; set; }
public string Title { get; set; }
}
public class IndexPresentation : GeneralPresentation
{
public IndexPresentation() { IndexPage = new Page(); }
public Page IndexPage { get; set; }
}
public class InsertPresentation : GeneralPresentation
{
public InsertPresentation() {
InsertPage = new Page();
ValidationInfo = new PageValidationInfo();
}
public PageValidationInfo ValidationInfo { get; set; }
public Page InsertPage { get; set; }
}
Closed. This question is opinion-based. It is not currently accepting answers.
Want to improve this question? Update the question so it can be answered with facts and citations by editing this post.
Closed 4 years ago.
The community reviewed whether to reopen this question 1 year ago and left it closed:
Original close reason(s) were not resolved
Improve this question
When designing a new system or getting your head around someone else's code, what are some tell tale signs that something has gone wrong in the design phase? Are there clues to look for on class diagrams and inheritance hierarchies or even in the code itself that just scream for a design overhaul, particularly early in a project?
The things that mostly stick out for me are "code smells".
Mostly I'm sensitive to things that go against "good practice".
Things like:
Methods that do things other than what you'd think from the name (eg: FileExists() that silently deletes zero byte files)
A few extremely long methods (sign of an object wrapper around a procedure)
Repeated use of switch/case statements on the same enumerated member (sign of sub-classes needing extraction)
Lots of member variables that are used for processing, not to capture state (might indicate need to extract a method object)
A class that has lots of responsibilities (violation of Single Repsonsibility principle)
Long chains of member access (this.that is fine, this.that.theOther is fine, but my.very.long.chain.of.member.accesses.for.a.result is brittle)
Poor naming of classes
Use of too many design patterns in a small space
Working too hard (rewriting functions already present in the framework, or elsewhere in the same project)
Poor spelling (anywhere) and grammar (in comments), or comments that are simply misleading
I'd say the number one rule of poor OO design (and yes I've been guilty of it too many times!) is:
Classes that break the Single
Responsibility Principle (SRP) and
perform too many actions
Followed by:
Too much inheritance instead of
composition, i.e. Classes that
derive from a sub-type purely so
they get functionality for free.
Favour Composition over Inheritance.
Impossible to unit test properly.
Anti-patterns
Software design anti-patterns
Abstraction inversion : Not exposing implemented functionality required by users, so that they re-implement it using higher level functions
Ambiguous viewpoint: Presenting a model (usually OOAD) without specifying its viewpoint
Big ball of mud: A system with no recognizable structure
Blob: Generalization of God object from object-oriented design
Gas factory: An unnecessarily complex design
Input kludge: Failing to specify and implement handling of possibly invalid input
Interface bloat: Making an interface so powerful that it is extremely difficult to implement
Magic pushbutton: Coding implementation logic directly within interface code, without using abstraction.
Race hazard: Failing to see the consequence of different orders of events
Railroaded solution: A proposed solution that while poor, is the only one available due to poor foresight and inflexibility in other areas of the design
Re-coupling: Introducing unnecessary object dependency
Stovepipe system: A barely maintainable assemblage of ill-related components
Staralised schema: A database schema containing dual purpose tables for normalised and datamart use
Object-oriented design anti-patterns
Anemic Domain Model: The use of domain model without any business logic which is not OOP because each object should have both attributes and behaviors
BaseBean: Inheriting functionality from a utility class rather than delegating to it
Call super: Requiring subclasses to call a superclass's overridden method
Circle-ellipse problem: Subtyping variable-types on the basis of value-subtypes
Empty subclass failure: Creating a class that fails the "Empty Subclass Test" by behaving differently from a class derived from it without modifications
God object: Concentrating too many functions in a single part of the design (class)
Object cesspool: Reusing objects whose state does not conform to the (possibly implicit) contract for re-use
Object orgy: Failing to properly encapsulate objects permitting unrestricted access to their internals
Poltergeists: Objects whose sole purpose is to pass information to another object
Sequential coupling: A class that requires its methods to be called in a particular order
Singletonitis: The overuse of the singleton pattern
Yet Another Useless Layer: Adding unnecessary layers to a program, library or framework. This became popular after the first book on programming patterns.
Yo-yo problem: A structure (e.g., of inheritance) that is hard to understand due to excessive fragmentation
This question makes the assumption that object-oriented means good design. There are cases where another approach is much more appropriate.
One smell is objects having hard dependencies/references to other objects that aren't a part of their natural object hierarchy or domain related composition.
Example: Say you have a city simulation. If the a Person object has a NearestPostOffice property you are probably in trouble.
One thing I hate to see is a base class down-casting itself to a derived class. When you see this, you know you have problems.
Other examples might be:
Excessive use of switch statements
Derived classes that override everything
In my view, all OOP code degenerates to procedural code over a sufficiently long time span.
Granted, if you read my most recent question, you might understand why I am a little jaded.
The key problem with OOP is that it doesn't make it obvious that your object construction graph should be independent of your call graph.
Once you fix that problem, OOP actually starts to make sense. The problem is that very few teams are aware of this design pattern.
Here's a few:
Circular dependencies
You with property XYZ of a base class wasn't protected/private
You wish your language supported multiple inheritance
Within a long method, sections surrounded with #region / #endregion - in almost every case I've seen, that code could easily be extracted into a new method OR needed to be refactored in some way.
Overly-complicated inheritance trees, where the sub-classes do very different things and are only tangentially related to one another.
Violation of DRY - sub-classes that each override a base method in almost exactly the same way, with only a minor variation. An example: I recently worked on some code where the subclasses each overrode a base method and where the only difference was a type test ("x is ThisType" vs "x is ThatType"). I implemented a method in the base that took a generic type T, that it then used in the test. Each child could then call the base implementation, passing the type it wanted to test against. This trimmed about 30 lines of code from each of 8 different child classes.
Duplicate code = Code that does the same thing...I think in my experience this is the biggest mistake that can occur in OO design.
Objects are good create a gazillion of them is a bad OO design.
Having all you objects inherit some base utility class just so you can call your utility methods without having to type so much code.
Find a programmer who is experienced with the code base. Ask them to explain how something works.
If they say "this function calls that function", their code is procedural.
If they say "this class interacts with that class", their code is OO.
Following are most prominent features of a bad design:
Rigidity
Fragility
Immobility
Take a look at The Dependency Inversion Principle
When you don't just have a Money\Amount class but a TrainerPrice class, TablePrice class, AddTablePriceAction class and so on.
IDE Driven Development or Auto-Complete development. Combined with extreme strict typing is a perfect storm.
This is where you see what could be a lot of what could be variable values become class names and method names as well as the gratuitous use of classes in general. You'll also see things like all primitives becoming objects. All literals as classes. Function parameters as classes. Then conversion methods everywhere. You'll also see things like a class wrapping another delivering a subset of methods to another class inclusive of only the ones it needs at present.
This creates the possibility to generate an near infinite amount of code which is great if you have billable hours. When variables, contexts, properties and states get unrolled into hyper explicit and overly specific classes then this creates an exponential cataclysm as sooner or later those things multiply. Think of it like [a, b] x [x, y]. This can be further compounded by an attempt to create a full fluent interface as well as adhere to as many design patterns as possible.
OOP languages are not as polymorphic as some loosely typed languages. Loosely typed languages often offer runtime polymorphism in shallow syntax that static analysis can't handle.
In OOP you might see forms of repetition hard to automatically detect that could be turned into more dynamic code using maps. Although such languages are less dynamic you can achieve dynamic features with some extra-work.
The trade of here is that you save thousands (or millions) of lines of code while potentially loosing IDE features and static analysis. Performance can go either way. Run time polymorphism can often be converted to generated code. However in some cases the space is so huge that anything other than runtime polymorphism is impossible.
Problems are a lot more common with OOP languages lacking generics and when OOP programmers try to strictly type dynamic loosely typed language.
What happens without generics is where you should have A for X = [Q, W, E] and Y = [R, T, Y] you instead see [AQR, AQT, AQY, AWR, AWT, AWY, AER, AET, AEY]. This is often due to fear or using typeless or passing the type as a variable for loosing IDE support.
Traditionally loosely typed languages are made with a text editor rather than an IDE and the advantage lost through IDE support is often gained in other ways such as organising and structuring code such that it is navigable.
Often IDEs can be configured to understand your dynamic code (and link into it) but few properly support it in a convenient manner.
Hint: The context here is OOP gone horrifically wrong in PHP where people using simple OOP Java programming traditionally have tried to apply that to PHP which even with some OOP support is a fundamentally different type of language.
Designing against your platform to try to turn it into one your used to, designing to cater to an IDE or other tools, designing to cater to supporting Unit Tests, etc should all ring alarm bells because it's a significant deviation away from designing working software to solve a given category of problems or a given feature set.