If you make changes to a resource setting (the max pool size on a connection pool for example) via the glassfish web interface do you have to restart the app server for the changes to take effect or does it all happen on the fly.
Thanks
Many configuration changes can be done on the fly, and if it wants to be restarted it will say so in the top left corner of the admin console, a yellow warning triangle with a "restart required" label. If that warning is not present there's no need for a restart.
Related
Our ServiceNOW instance recently got upgraded from Eureka to Geneva.
MID Server status became down and the version does not match the Build number in the stats.
I was told that the MID Server will auto upgrade which didn't happened. I am using a proxy server to connect, when I tried communicating with the instance through the server it is working however I assume the service or application installed is not able to communicate with the instance.
I created a new service and it worked perfectly for 1 min however after that the status of it became down.
Then I tried changing the configurations of old services however no good.
Now the services are running fine however in the config file in the mid_sys_id section mid server details not getting populated and the status of the MID Server in the instance is always down.
Do I need to change any properties in the instance?
Since I use proxy server do I need to remove the comment line of the auto upgrade through proxy section or can I leave that blank?
What is the issue here? Why my MID Server is not getting upgraded? Kindly help me.. If possible an explanation with screen shot would be much appreciated.
If you're on Geneva, you should be able to simply go to your MIDServer listing, from inside your instance, click on a MIDServer, and find 'Upgrade MID' in the Related links section. That should start an upgrade for that MID Server. If it fails, there should be an entry in either the ServiceNow logs or the MID Server logs with more information why it failed.
This may belong in ServerFault, but I wanted to approach this community first. If this is not correct, please move this thread or close and I will open on the correct thread.
PROBLEM:
Hosts, along with their associated services, disappear and reappear upon refresh (F5 / Ctrl+F5 / etc).
STEPS TO REPRODUCE:
1. Log into Nagios
2. Click Service Detail
3. See a breakdown of services but you don't see the last one you added.
4. Refresh screen by using F5 / Ctrl+F5 / etc and it doesn't show up still
5. Refresh screen by using F5 / Ctrl+F5 / etc and it doesn't show up still
6. Refresh screen and it will show up.
(!) - Steps 4-6 vary
WHAT I'VE TRIED:
Restarting Nagios service (service Nagios restart)
Restarting HTTPD service (service httpd restart)
Restarting VPS
Refresh browser including "Clear Cache and Hard Reload"
Tried different browsers
Tried different computers
Tried different networks
SCREENSHOTS:
GOOD
https://i.imgur.com/KUW5C6E.png
BAD
https://i.imgur.com/rWFLEaf.png
POSSIBLE CAUSE:
The reason we're in this situation now is because we had an intern add this latest host and its associated service. He added it correctly, and I even checked his work. He did the normal preflight but instead of issuing the reset command via SSH he issued the command on the Web interface itself by accessing "Process Info > Restart the Nagios process". Seems like it would work OK, but we've never restarted like this and is the only reason I suspect it's the culprit of the issue we are seeing. Is there something different that this restart does over the normal SSH restart?
EDIT: To add to all of this, we have updated a different file today, unrelated to this host or it's services and Nagios is not updating.
Thanks for helping!
Rich
EXTRA:
Here is a screenshot of the config file:
https://i.imgur.com/2UsYZcw.png
This can happen if you have multiple Nagios services running, There could be a secondary instance of the service running which hasn't been updated with the new configuration files as it technically hasn't been restarted. I've had this happen once or twice.
First, shut down Nagios
service nagios stop
Next, kill all remaining instances.
killall -9 nagios
Finally, start Nagios back up
service nagios start
That should fix your problem.
I'm using ActiveMQ 5.10 and would like to create a user that has read-only access through the web console.
Red Hat published this article, mentioning that it's not really read only due to a bug in ActiveMQ.
According to the bug report AMQ-4567, the bug is fixed as of ActiveMQ 5.9. However, I'm not seeing it work appropriately.
I have tried a number of different configurations, with the most recent being two separate JAAS implementations, one for Jetty and one for ActiveMQ. The relevant property files are excerpted below.
I can mostly log in to the web console using the "system" user. But the guest user doesn't work at all. The application user (appuser) doesn't need access to the web console at all.
My authN/authZ needs are pretty trivial: one admin user, one application account, and one read-only monitoring account.
Is there any good way to get this working with a recent version of ActiveMQ (>= 5.9.0)?
groups.properties
admins=system
users=appuser,admin
guests=guest
users.properties
system={password redacted}
appuser=appuser
guest=guest
jetty-realm.properties
system: MD5:46cf1b5451345f5176cd70713e0c9e07,user,admin
guest: guest,guest
As an aside, I used the Jetty tutorial and the Rundeck instructions to figure out the jetty-realm.properties file and chapter 6 of ActiveMQ in Action to work out the ActiveMQ JAAS.
I was finally able to get to what I wanted by deploying the web console to an external Tomcat instance. I assume that when it runs out of process, it can't bypass security and so has to use whatever credentials you provide. In this case, I gave the Tomcat instance the read-only JMX user credentials.
It's not great, as there is no security trimmed UI. You can still attempt to create new destinations, delete destinations, etc. When you try with a read-only user, you get an error. That gets a "D" for UX, but a "B" for security.
so on the left hand side of weblogic console panel...there are 5 different health status of the servers. I see weblogic change them status to warning whenever there is a stuck thread. However, when one does in wlst script.
connection(name,pass,url)
serverRuntime()
get('HealthState') the server health returns Health_Ok even though on the panel on the left hand side the health status is warning.
Any tips are appreciated
I tried serverLifeCycleRuntimes() by the way. I googled every website regarding Weblogic and not being able to figure out. Thanks
Well I kinda figure it out. It has subsystems. What I do is I cd into JDBC, check the health, then cd into ThreadPool check the health. When the server changes to overload? I do not know
I have deployed a system integrated with weblogic, but until now I faced a problem is the weblogic increasing the stdout.out size heavily(by GB per week), it caused the system to load slowly and slowly.
Any way to prevent it increase the size heavily or redirect into .log?
Thanks alot
As David Herget says above, using the WebLogic Scripting Tool (WLST) to redirect StdOut and StdErr did not actually work for me either; I had to also do so through the web console (even though they appear to be set on the console) and restart the relevant jvms.
I can't reply to David's comment above due to being a newbie. [Edited since for clarity]
Not totally sure to understand fully your question.
Are you talking about the {server_name}.out file located in the {Domain_Path}/servers/{server_name}/logs ?
If so, I've never found anyway to rotate those logs automatically so I run a script each day to rotate it (basically copying it to another name, zip it and echoing a NULL in the orginal file...erasing the older one after).
If you are talking about redirecting StdOut to the logs though, that can be done within the console for each server in the logging tab by checking "Redirect stdout logging enabled". Configuration to rotate those logs can also be done within that tab.
On that, StdErr can also be redirected, but not from the console (in WL9). You have to put "RedirectStderrToServerLogEnabled" at true in the MBean tree by wlst (it's located at /Servers/{server_name}/Log/{server_name}
I know the question was ask long time ago but hoping it would help nonetheless
Weblogic provides features of log files rotation based on the size and time interval.
You can try rotating the log files based on the size. You would need to configure the log rotation policy from the admin console. Please refer the below link for further details.
http://docs.oracle.com/cd/E12840_01/wls/docs103/ConsoleHelp/taskhelp/logging/RotateLogFiles.html
If you want to rotate the log files on demand, you can use the below WSLT script.
C:\>java weblogic.WLST
#connect WLST to an Administration Server
wls:/offline> connect('username','password')
#navigate to the ServerRuntime MBean hierarchy
wls:/mydomain/serverConfig> serverRuntime()
wls:/mydomain/serverRuntime>ls()
#navigate to the server LogRuntimeMBean
wls:/mydomain/serverRuntime> cd('LogRuntime/myserver')
wls:/mydomain/serverRuntime/LogRuntime/myserver> ls()
-r-- Name myserver
-r-- Type LogRuntime
-r-x forceLogRotation java.lang.Void :
#force the immediate rotation of the server log file
wls:/mydomain/serverRuntime/LogRuntime/myserver> cmo.forceLogRotation()
wls:/mydomain/serverRuntime/LogRuntime/myserver>
http://docs.oracle.com/cd/E12840_01/wls/docs103/logging/config_logs.html#wp1001654