I'm working with a PocketPC vm for development over here.
I can get the virtual device to connect to the internet, but I can't get it to connect to a web service on my local (host) machine.
I've tried the machine name and my IP address, different ports, but no luck.
Anyone else have this issue?
EDIT: I have an actual device at my machine as well. When docked I don't have this problem with the real device, just the emulated one.
I have not had the specific issue. But, the best way I've found to deal with these issues when using WCF is to enable tracing and see what the error messages are.
If you are connected via ActiveSync, you can connect to the name "ppp_peer".
This name will always resolve to the machine connected via active sync.
Figured it out when I read this article:
http://www.betterthaneveryone.com/archive/2008/08/31/getting-network-access-on-the-windows-mobile-emulator.aspx
The device has to be docked. You need to use the Device Emulator Manager to dock the device. Also note: you can only have one device docked at a given time.
Once the device is docked, you should see the Windows Mobile Device Center display. Find the running device (look for the green arrow), right-click and select Cradle. Remember, only one device can be cradled/docked at a time. If you have a real device that is cradled already, you cannot cradle an emulator.
In Windows Mobile Device Center -> Mobile Device Settings -> Connection Settings: Check "Allow connections to one of the following:" and select DMA in the dropdown.
On the emulator: File->Configure->Network. Make sure a valid network device is selected.
From the emulated OS: Start Menu -> Settings -> Connections -> Connections -> Advanced -> Select Networks. Make both drop-downs My ISP.
That should be it. To test, load Internet Explorer, browse to StackOverflow.com. Next, browse to a web page on your local machine.
Related
enter image description here
My React native app is not running on a physical device.it's showing some Gradle error.
I check many articles but cant finds any soulation.
please help on out from this error.
You can also connect to the development server over Wi-Fi. You'll first need to install the app on your device using a USB cable, but once that has been done you can debug wirelessly by following these instructions. You'll need your development machine's current IP address before proceeding.
Open the command prompt and type ipconfig to find your machine's IP address (more info).
Make sure your laptop and your phone are on the same Wi-Fi network.
Open your React Native app on your device
You'll see a red screen with an error. This is OK. The following steps will fix that.
Open the in-app Developer menu.
Go to Dev Settings → Debug server host & port for device.
Type in your machine's IP address and the port of the local dev server (e.g. 10.0.1.1:8081).
Go back to the Developer menu and select Reload JS.
Please Check complete on official site as well. Other Best link
I'm using vmware workstation 14 Player, there is no option for Virtual Network Editor in VMPlayer. There are several sites which are saying to open the network editor. As I could not find network editor I'm using VM Player 14. Please view the screenshot for better understating.
Here you can see there is no option for network editor and when I click edit virtual machine setting I get the following Box
Here you can see I've selected NAT, but still internet is not working inside VMware. If anyone could help with this.
I was following this video but https://www.youtube.com/watch?v=H2j3nyl4muQ
but here the person is usning VMware and not the vmware workstation player.
Inside preferences I see the following but nothing related to network settings etc
Inside my virtual machine which is a Windows Server 2012 the network adapter shows the following
To do what the video follows up is much better to do it in VirtualBox. Configuring your own NAT is quite easily done, whereas in new VmWare I still have not found a way to do it.
Check this to understand better how to do it.
as stated in my question. I'm trying to have connection to a virtual machine remotely without enabling virtualbox remote desktop screen. using the network host only. but I could not make this connection without having to enable the option on the screen.
according to my research it is possible because applications as Andy or genymotion does this.
if anyone knows the subject. appreciate your help
How to enable Hyper-V to connect VPN for external internet access in Windows 8?
I'm trying to run Windows phone 8 app using emulator, and while see app in emulator it doesn't connect the VPN to access internet.
Please advice.
Thanks.
MSDN has a troubleshooting page for the Windows Phone 8 emulator. Perhaps you can find related info there. Something like this might help:
Cannot connect to Internet destinations
The Windows Phone 8 Emulator uses the HTTP proxy settings from the host computer. If you can’t access Internet resources from the emulator, check with your IT administrator to make sure that your proxy settings will work with the emulator.
If your network’s proxy servers are unavailable or malfunctioning, it might be possible to restore connectivity for the emulator by disabling automatic proxy detection on the host computer. However this only works in certain network configurations.
To disable automatic proxy detection on the host computer
On the host computer, open Internet Options from the Control Panel. The Internet Properties dialog box opens.
In the Internet Properties dialog box, click the Connections tab.
On the Connections page, click the LAN settings button. The Local Area Network (LAN) Settings dialog box opens.
In the Local Area Network (LAN) Settings dialog box, deselect all the check boxes. Click OK twice to close both dialog boxes.
Restart the emulator and retry the connection.
Also this MSDN blog-post can be helpful: Why can’t the Windows Phone Emulator go online?. Useful part of the article:
As you see, clicking the “>>” on the bar parallel to the Emulator will open a small window with 4 tabs. The last tab is for “Network”. To explain in simpler terms, there are two adapters here – one is for internal use by Emulator and other is for external network connectivity. Each adapter will have an IP address (IPv4) associated with itself. The one of our interest is under Adapter #2.
I have erased out the IPv4 address that is assigned to Adapter #2 (Yellow box), but you find that the IP assigned here starts with 169.254.x.x…., then Bingo! - we have figured out the problem. How?
The IP addresses starting with 169.254.x.x …. Are usually the self-assigned default addresses to a device and not really helpful to get the device to go online. This IP should either be a static IP or the one assigned by the DHCP server (if you have one in the environment) for the device to be able to connect to external networks.
Hope this helps.
I have installed windows phone 8 SDK and tried running a simple app which embeds a WebBrowser on a page. When I try to run the app in emulator the emulator does not get internet connection. It displays an error message saying "You don't have permission to modify internal Hyper-V network adapter settings required to run the emulator". Im sure my login has admin permissions. My machine is 64bit, hyper v is enabled and Hyper v manager is running, hardware virtualization is enabled in the BIOS settings, DHCP is enabled and its connected to a wired network. I have checked all the system requirements. What ever I do it keeps on giving the same error message. I setup everything in a different machine and tried running the app in that machine. The same error message is displayed in the that machine also. Can anyone tell me how to get it working.
DHCP is enabled and its connected to a wired network
Can you run ipconfig /all on your host machine and post it here please?
seems you have problem with your DHCP or maybe multiple DHCP and conflict.
You need to add your user account as a member of the "Hyper-V Administrators" group on the machine.
Detailed steps:
Hit Windows key + Q and search for "local users and groups". Change the search scope to "Settings". Click "Edit local users and groups".
Expand the "Groups" section. Right-click on "Hyper-V Administrators" and select "Add to group".
Add your user account.
Some connection tools on the host can have negative effects when used with the emulator; I found having cisco VPN client installed on the host prevented the emulator from finding the internet. Other VPN clients may have similar side-effects. I simply uninstalled cisco (the inbuilt windows VPN is fine for what I need) and it worked perfectly.
I've also seen problems where it won't find the internet after the host has been suspended / resumed. In that scenario, it turned out to be bad network drivers. I installed a dedicated Intel NIC (rather than the on-board NIC on the motherboard) - problem solved.
Basically, Hyper-V is a bit fussy.
try refreshing the hyper-v by unchecking and then checking it again,this worked for me.
Steps:
1.control panel>>programs>>Programs and features>>turn windows features on and off>>hyper-v
2.uncheck it and restart the pc.
3.again go to control panel an check hyper-v and restart the pc again.
the try to run the emulator,should work..
another possible reason is that you did not start vs2013 as admin