I'm new on Bonita Community. So my issu is that the server Tomcat doesn't find bonita log page.
When I run start-bonita.bash
Here is the error
Here is my bonita.log
In this project, I use BonitaCommunity-7.10.6 and the version of Java is 8
Could you help me please ??
Related
I have SonarQube for Bamboo plugged in and working fine with MSBuild. I also have SonarQube or bit bucket server, which, as far as I can tell, is configured correctly, but pull request analysis is not working. I have a repository in bit bucket configured to allow Sonar Qube analysis and have min. severity set to INFO. But when I click the pull request, a box on the right says:
"Sonar data unavailable. Was not able to fetch data for Sonar project "[project name]:[branch name]". Either the build is not finished yet, your pull request has not been analyzed or a non-existing Sonar project is referenced. You can configure the referenced Sonar project in the repository settings."
The referenced project is configured right in the repo settings, and I have branch analysis for this project working just fine on sonar qube server from the bamboo plugin. The pull request analysis just won't jive while everything else is working. Anyone seen this issue? Any ideas as to why?
Bit bucket server v4.13.0
Sonar for bit bucket server 1.13.1-bbs4
Could you please create a bug report at https://support.mibexsoftware.com ? We can then analyze the issue in detail. It would also help if you could send us the debug logs of the plug-in. I can give you more detailed instructions after we have your bug report.
Thanks,
Michael from Mibex Software
I created a simple project using ATG 10.2 .I want to know how to deploy it in weblogic. Please provide detailed procedure with screenshots,if possible.
To provide a 'detailed' procedure is beyond the scope of what StackOverflow is trying to provide. That said, if you have an understanding of the Weblogic Management Console you should be able to follow these steps to setup your initial deployment:
Create a Server
1.1 Specify a server name (eg. commerce) and the port number this server will run on (eg. 8180). Select it as a 'Stand-alone server'.
1.2 Once created go to Configuration > Server Start for the newly created server and modify the 'Arguments' block and include the following setings (assuming you are running windows, for Unix update your own paths)
-Datg.dynamo.data-dir=c:\ATG-Data -Datg.dynamo.server.name=commerce -d64 -XX:ParallelGCThreads=8 -Dsun.rmi.dgc.client.gcInterval=3600000 -Dsun.rmi.dgc.server.gcInterval=3600000 -Xms1152m -Xmx2048m -XX:NewSize=128m -XX:MaxNewSize=256m -XX:PermSize=128m -XX:MaxPermSize=256m
1.3 Save your Server
Create DataSources
2.1 In the Console click on 'Services > Data Sources'
2.2 Create 'New' datasources for each of your connections. As a minimum you will need connections for ATGSwitchingDS_A, ATGSwitchingDS_B (Assuming you are doing switching datasources) and ATGProductionDS. These names should match your JNDI names in your property files. Remember to specify the 'commerce' server as the target for each of the datasources.
Create Deployment
3.1 Assuming you've already built your EAR (eg. ATGProduction.ear) and it is available in c:\deployments you need to create a deployment in Weblogic. You need to create the deployment in the console and specify the target as 'commerce'. Once done you need to also 'start serving requests' on the deployment.
Start Server
You should now be able to see your server running on port 8180 with the log files being written to c:\ATG-Data\servers\commerce\logs.
If after this things aren't running, post specific questions about your issues and someone here might be able to help you.
i'am trying to integrate hybris 4.7.9 with endeca. I have installed the following endeca components. 1)MDEX engine 2)Platform services 3)Endeca workbench 4)CAS.
I have deployed a sample application on endeca side using "D:\Endeca\ToolsAndFrameworks\11.0.0\deployment_template\bin\deploy.bat"
In Hyend2 in admincockpit of hybris
I have made EAC/CAS connection with my appication and made a export job.
Problem is i am not able to run that job, it reports me following error:
http://localhost:8500/MyAppen_en_data/?wsdl returned response code 404
at com.endeca.itl.service.ServiceLocator.getService(ServiceLocator.java:150)
I don't know Hybris, but since the error is related to Endeca, let me try to give some pointers.
CAS: Check that CAS is up and running
App Name: You might have specified app-name-with-locale (MyAppen) somewhere where you need to specify only app-name (MyApp). [The Endeca app name without the locale is called as "Base Application Name". Go back and check all your configurations in Hybris and Endeca].
You may also refer to this blog (Although it is for ATG framework, it should give idea for Hybris as well).
HTTP Status 500 -
type Exception report message description The server encountered an internal error () that prevented it from fulfilling this request. exception org.apache.jasper.JasperException: Unable to compile class for JSP: An error occurred at line: 1 in the generated java file The type java.util.Map$Entry cannot be resolved. It is indirectly referenced from required .class files Stacktrace: org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:102) org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:331) org.apache.jasper.compiler.JDTCompiler.generateClass(JDTCompiler.java:469) org.apache.jasper.compiler.Compiler.compile(Compiler.java:378) org.apache.jasper.compiler.Compiler.compile(Compiler.java:353) org.apache.jasper.compiler.Compiler.compile(Compiler.java:340) org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:646) org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:357) org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:390) org.apache.jasper.servlet.JspServlet.service(JspServlet.java:334) javax.servlet.http.HttpServlet.service(HttpServlet.java:722)note The full stack trace of the root cause is available in the Apache Tomcat/7.0.27 logs.
Plz help me friends how to solve this problem . I have got this problem when i open webpage (localhost:8085)soon after installing tomcat (i have set classpath tooo ) .Plz kindly send any answers to rakeshdatla999#gmail.com...
Possible mismatch between version of Tomcat and version of JDK/JRE. It happened to me on Mac with Java 8 and Tomcat 7.2*. Had to install and use Tomcat 7.5*
I was using Windows 10 OS for developing applications in TM1 Performance Modeller as part of Academic projects.
I had been trying to run pmpsvc services of IBM Performance Modeller. I was getting the error "unable to logon to pmpsvc". Also, when I was trying to logon to Application Server in my browser, I was getting the same error that you've posted here.
What I think(after going through different posts in the search results of Google and Stackoverflow): There is some compatibility issue with JSP 2.1 in your project or maybe Tomcat version in-compatibilty.
How this was solved: I installed Windows 7 in dual-boot mode by allocating 100 GB to Windows 7. Installed the IBM software TM1 package(Performance Modeller and BI Insight Tool) in Win7 and everything runs smoothly now.
The IBM Instructors that demonstrated the use of Tm1 Dimensional Modelling also were running Windows 7 in their machines.
I guess - if you wish to solve the problem without going into the details of this exception, You can give this a try!
When I am in the web studio I click the Search configurations or Dimension Order, I get the following error:
The operation failed because the manager state is 'Stopped'. For the operation to succeed, the manager state must be running. Make sure all ENEs and A-ENEs are running.
It is version 4.8. This was installed and configured long before I got here. I have no experience in Endeca. No idea how it all works and information online isn't very helpful.
Any help would be appreciated.
Thanks!
Brian
Version 4.8 doesn't have Endeca HTTP Service or Endeca Tool Service, plus it's not clear that the author's installation is running on Windows. I believe Endeca v4.8 only had Web Studio (Tomcat app), JCD, Dgraph, and Agraph processes. having said that the error message indicates that you need to make sure that either Dgraph or Agraph processes are running (ENE is short for endeca navigation engine and is an alias for dgraph, a-ene is an alias for agraph)
There could more information in the tomcat logs, please check those which should be located under workspace\logs folder.
All of the endeca services need to be running. On a windows machine make sure "Endeca HTTP Service", "Endeca JCD", and "Endeca Tools service" are all running.