I require to compile the rabbitmq source code in windows. I have downloaded the code from path and installed cygwin.
As per the link, while performing make command, it is throwing below error:
$ make
erlang.mk:4847: warning: overriding recipe for target '/cygdrive/d/Softwares/OSSSourceCode/rabbitmq-server-master/deps/syslog'
erlang.mk:4847: warning: ignoring old recipe for target '/cygdrive/d/Softwares/OSSSourceCode/rabbitmq-server-master/deps/syslog'
DEP rabbit_common
/bin/sh: git: command not found
/bin/sh: git: command not found
/bin/sh: line 0: cd: /cygdrive/d/Softwares/OSSSourceCode/rabbitmq-server-master/deps/rabbit_common:
No such file or directory
DEP rabbitmq_cli
/bin/sh: git: command not found
/bin/sh: git: command not found
/bin/sh: line 0: cd: /cygdrive/d/Softwares/OSSSourceCode/rabbitmq-server-master/deps/rabbitmq_cli:
No such file or directory
make: *** [erlang.mk:4851: /cygdrive/d/Softwares/OSSSourceCode/rabbitmq-server-master/deps/rabbitmq_cli]
Error 1
Please help me with this.
Compiling RabbitMQ on Windows is not recommended due to the complex steps required. If you must, here is a link to a guide to doing it:
https://gist.github.com/lukebakken/f0323f90291b5e5e7bbbe0287c411171
If you have further questions, please follow up on the mailing list.
NOTE: the RabbitMQ team monitors the rabbitmq-users mailing list and only sometimes answers questions on StackOverflow.
Related
I'm building drake from source, specifically this branch of Russ' fork:
https://github.com/RussTedrake/drake
everything worked without issue until the last command make -j
where I get the following output:
[ 12%] Performing build step for 'drake_cxx_python'
INFO: Analyzed target //:install (0 packages loaded, 0 targets configured).
INFO: Found 1 target...
ERROR: /Users/chewchiashaoyuan/Documents/Software/drake/bindings/pydrake/BUILD.bazel:780:22: GenerateMypyStubs bindings/pydrake/pydrake/__init__.pyi failed: (Exit 1): stubgen failed: error executing command bazel-out/darwin-opt/bin/bindings/pydrake/stubgen --quiet '--package=pydrake' '--output=bazel-out/darwin-opt/bin/bindings/pydrake'
Use --sandbox_debug to see verbose messages from the sandbox and retain the sandbox build root for debugging
Matplotlib created a temporary config/cache directory at /var/folders/sl/37m0k__51_3_5c5j02w201r40000gn/T/matplotlib-8mr5qkfg because the default path (/Users/chewchiashaoyuan/.matplotlib) is not a writable directory; it is highly recommended to set the MPLCONFIGDIR environment variable to a writable directory, in particular to speed up the import of Matplotlib and to better support multiprocessing.
Critical error during semantic analysis: /usr/local/lib/python3.10/site-packages/pydrake/symbolic.pyi:203: error: invalid syntax
Target //:install failed to build
Use --verbose_failures to see the command lines of failed build steps.
ERROR: /Users/chewchiashaoyuan/Documents/Software/drake/BUILD.bazel:63:8 Middleman _middlemen/install-runfiles failed: (Exit 1): stubgen failed: error executing command bazel-out/darwin-opt/bin/bindings/pydrake/stubgen --quiet '--package=pydrake' '--output=bazel-out/darwin-opt/bin/bindings/pydrake'
Use --sandbox_debug to see verbose messages from the sandbox and retain the sandbox build root for debugging
INFO: Elapsed time: 9.617s, Critical Path: 9.33s
INFO: 2 processes: 2 internal.
FAILED: Build did NOT complete successfully
make[2]: *** [drake_cxx_python-prefix/src/drake_cxx_python-stamp/drake_cxx_python-build] Error 1
make[1]: *** [CMakeFiles/drake_cxx_python.dir/all] Error 2
make: *** [all] Error 2
My operating system is:
macOS Monterey Version 12.6
The full make -j -d output is here
I referenced https://drake.mit.edu/from_source.html, https://drake.mit.edu/bazel.html#snopt and https://github.com/RobotLocomotion/drake/issues/12175
I did the following:
git clone https://github.com/RussTedrake/drake
cd drake
git checkout kin_traj_opt2
./setup/mac/install_prereqs.sh
cd ..
mkdir drake-build
cd drake-build
cmake -DWITH_ROBOTLOCOMOTION_SNOPT=ON ../drake
make -j
Fixes attempted:
tried deleting the whole drake-build directory and doing the whole process from scratch, got the same errors
One filename from the error message stands out: /usr/local/lib/python3.10/site-packages/pydrake/symbolic.pyi. It looks like you have sudo pip install drake installed into a system-wide directory. That is likely interfering with the from-source build of Drake and will need to be removed.
I'm trying to get involved in open source and also am quite interested in robotics, so I thought about contributing to MoveIt 2. As a first step, I'm installing MoveIt 2 from source on my Ubuntu 20.04 VM in VirtualBox.
I've run through all the instructions here: https://moveit.ros.org/install-moveit2/source/#:~:text=colcon%20build%20%2D%2Devent%2Dhandlers%20desktop_notification%2D%20status%2D%20%2D%2Dcmake%2Dargs%20%2DDCMAKE_BUILD_TYPE%3DRelease
However, the build is failing on the highlighted part. The error message is as follows:
Starting >>> geometric_shapes
--- stderr: geometric_shapes
CMake Error at CMakeLists.txt:47 (find_package):
By not providing "Findeigen3_cmake_module.cmake" in CMAKE_MODULE_PATH this
project has asked CMake to find a package configuration file provided by
"eigen3_cmake_module", but CMake did not find one.
Could not find a package configuration file provided by
"eigen3_cmake_module" with any of the following names:
eigen3_cmake_moduleConfig.cmake
eigen3_cmake_module-config.cmake
Add the installation prefix of "eigen3_cmake_module" to CMAKE_PREFIX_PATH
or set "eigen3_cmake_module_DIR" to a directory containing one of the above
files. If "eigen3_cmake_module" provides a separate development package or
SDK, be sure it has been installed.
---
Failed <<< geometric_shapes [1.20s, exited with code 1]
Summary: 0 packages finished [1.46s]
1 package failed: geometric_shapes
1 package had stderr output: geometric_shapes
33 packages not processed
Any help is really appreciated. Thanks!
You have to install ROS2 before building Move It 2. After installing the ROS2 binaries, the error doesn't occur.
currenty I'm trying to install Riak on the Raspberry Pi 3 for testing purposes. I used the following instruction from basho:
http://docs.basho.com/riak/kv/2.2.2/setup/installing/source/
I'm having problems compiling it from source. I tried to compile it on Raspbian Jessie and then switched to Ubuntu Server 16.04. Both times with the same result. It is not compiling and aborts at a certain point. I don't know what causes the problem since it only says: recipe for target 'util/perf_count.o' failed. Searching Google and the mailing list from basho weren't successful.
The version of gcc is gcc (Raspbian 4.9.2-10) 4.9.2. The version of Erlang is Erlang R16B02_basho8 (erts-5.10.3)
The commands i used are the following:
Installing Erlang:
wget http://s3.amazonaws.com/downloads.basho.com/erlang/otp_src_R16B02basho10.tar.gz
tar zxvf otp_src_R16B02-basho10.tar.gz
cd OTP_R16B02_basho10
./otp_build autoconf
./configure && make && sudo make install
Installing Riak:
wget http://s3.amazonaws.com/downloads.basho.com/riak/2.2/2.2.1/riak-2.2.1.tar.gz
tar zxvf riak-2.2.1.tar.gz
cd riak-2.2.1
make locked-deps
make rel
Any suggestions are welcome.
Output:
`./include/leveldb/atomics.h:155:15: note:
template argument deduction/substitution failed util/perf_count.cc:439:40:
note: deduced conflicting types for parameter ‘ValueT’
(‘unsigned int’ and‘int’ add_and_fetch(ptr_32, 1);`
`Makefile:190: recipe for target 'util/perf_count.o' failed
make[1]: *** [util/perf_count.o] Error 1
make[1]: *** Waiting for unfinished jobs....
make[1]: Leaving directory '/home/pi/Riak/riak/deps/eleveldb/c_src/leveldb'
ERROR: Command [compile] failed!
Makefile:23: recipe for target 'compile' failed
make: *** [compile] Error 1`
After digging deeper I got some help from Basho's mailing list (many thanks).
The Link below shows the steps to solve this problem:
http://lists.basho.com/pipermail/riak-users_lists.basho.com/2017-April/019187.html
The next link is a detailed instruction, which helps to install Riak on the Raspberry Pi 3:
http://docs.basho.com/riak/kv/2.2.2/setup/installing/source/
I have installed the list of Required tools shown on the Build Environment Setup for Linux, including JEMALLOC, on my Raspberry Pi which has Raspbian Wheezy installed, fully updated, and setup for development. I have successfully built some of the listed tools (Bison, CMake 3.7.2). I have gcc and g++ (Raspbian 4.8.2-21rpi3rpi1) 4.8.2.
When I attempt to build mariadb 10.1.22 (master branch from the github repository) using cmake . -DBUILD_CONFIG=mysql_release I get an error:
CMake Error at cmake/jemalloc.cmake:38 (MESSAGE):
jemalloc is not found
Call Stack (most recent call first):
CMakeLists.txt:343 (CHECK_JEMALLOC)
After building JEMALLOC, I installed it into /usr/local using sudo make install. I have export JEMALLOC_PATH=/usr/local in my .bashrc.
I don't understand why CHECK_JEMALLOC is failing to find the correct files. A list of the file locations is:
/usr/local/bin/jemalloc.sh
/usr/local/bin/jemalloc-config
/usr/local/include/jemalloc
/usr/local/include/jemalloc/jemalloc.h
/usr/local/lib/pkgconfig/jemalloc.pc
/usr/local/lib/libjemalloc.so
/usr/local/lib/libjemalloc_pic.a
/usr/local/lib/libjemalloc.so.2
/usr/local/lib/libjemalloc.a
/usr/local/share/doc/jemalloc
/usr/local/share/doc/jemalloc/jemalloc.html
/usr/local/share/man/man3/jemalloc.3
I can attach a link to the CMake configure log, error log, and terminal output if needed.
UPDATE
I tried using just cmake . and the configuration part worked, but the make failed with the following error:
/home/user/Downloads/mariadb/server/storage/mroonga/vendor/groonga/lib/expr.c:6816:7: note: in expansion of macro ‘GRN_PTR_POP’
GRN_PTR_POP(&keywords, keyword);
^
cc: internal compiler error: Killed (program cc1)
Please submit a full bug report,
with preprocessed source if appropriate.
See <file:///usr/share/doc/gcc-4.8/README.Bugs> for instructions.
storage/mroonga/vendor/groonga/lib/CMakeFiles/libgroonga.dir/build.make:257: recipe for target 'storage/mroonga/vendor/groonga/lib/CMakeFiles/libgroonga.dir/expr.c.o' failed
make[2]: *** [storage/mroonga/vendor/groonga/lib/CMakeFiles/libgroonga.dir/expr.c.o] Error 4
make[2]: Leaving directory '/home/user/Downloads/mariadb/server'
CMakeFiles/Makefile2:4420: recipe for target 'storage/mroonga/vendor/groonga/lib/CMakeFiles/libgroonga.dir/all' failed
make[1]: *** [storage/mroonga/vendor/groonga/lib/CMakeFiles/libgroonga.dir/all] Error 2
make[1]: Leaving directory '/home/user/Downloads/mariadb/server'
Makefile:152: recipe for target 'all' failed
make: *** [all] Error 2
I have searched the internet all weekend and cannot find anyone who has had a similar error. I am trying to install libapache-mod-factcgi but the package errors out and I cannot figure out why.
pi#applejacks:/tmp $ sudo apt-get source -b libapache2-mod-fastcgi
Reading package lists... Done
Building dependency tree
Reading state information... Done
Skipping already downloaded file 'libapache-mod-fastcgi_2.4.7~0910052141-1.1+deb8u1.dsc'
Skipping already downloaded file 'libapache-mod-fastcgi_2.4.7~0910052141.orig.tar.gz'
Skipping already downloaded file 'libapache-mod-fastcgi_2.4.7~0910052141-1.1+deb8u1.diff.gz'
Need to get 0 B of source archives.
Skipping unpack of already unpacked source in libapache-mod-fastcgi-2.4.7~0910052141
dpkg-buildpackage: source package libapache-mod-fastcgi
dpkg-buildpackage: source version 2.4.7~0910052141-1.1+deb8u1
dpkg-buildpackage: source distribution jessie
dpkg-buildpackage: source changed by Andreas Beckmann <anbe#debian.org>
dpkg-buildpackage: host architecture armhf
dpkg-source --before-build libapache-mod-fastcgi-2.4.7~0910052141
debian/rules clean
dh_listpackages: Please specify the compatibility level in debian/compat
dh_listpackages: Compatibility levels before 5 are no longer supported (level 1 requested)
/usr/share/cdbs/1/rules/dpatch.mk:33: CDBS WARNING: dpatch.mk is deprecated since 0.4.85 - please use source format 3.0 (quilt) instead
test -x debian/rules
rmdir /tmp/libapache-mod-fastcgi-2.4.7~0910052141/build-tmp
rmdir: failed to remove ‘/tmp/libapache-mod-fastcgi-2.4.7~0910052141/build-tmp’: No such file or directory
/usr/share/cdbs/1/rules/buildcore.mk:46: recipe for target 'cleanbuilddir' failed
make: [cleanbuilddir] Error 1 (ignored)
dh_clean
dh_clean: Please specify the compatibility level in debian/compat
/usr/share/cdbs/1/rules/debhelper.mk:189: recipe for target 'clean' failed
make: *** [clean] Error 2
dpkg-buildpackage: error: debian/rules clean gave error exit status 2
Build command 'cd libapache-mod-fastcgi-2.4.7~0910052141 && dpkg-buildpackage -b -uc' failed.
E: Child process failed
I'm trying to build Apache2 on RPi also. These commands got the .deb building for me:
cd libapache-mod-fastcgi-2.4.7~0910052141;
echo 10 > debian/compat;
dpkg-buildpackage -b -uc
Then cd .. to go one level up, then install the package with dpkg -i ./libapache2-mod-fastcgi_2.4.7~0910052141-1.1+deb8u1_armhf.deb