I've a Keras model that when I fit fails with this error
> kerasInput = Input(shape=(None, 47))
> LSTM(..)(kerasInput)
...
> model.fit(realInput, ...)
ValueError: Error when checking input: expected input_1 to have 3 dimensions, but got array with shape (10842, 1)
When looking at my input I found it has a shape of (10842, 1) but for each row it's actually a list of list. I can verify with
> pd.DataFrame(realInput[0]).shape
(260, 47)
How I could correct my input shape?
When trying with keras Reshape layer, the creation of the model fails with:
Model inputs must come from `keras.layers.Input` (thus holding past layer metadata), they cannot be the output of a previous non-Input layer. Here, a tensor specified as input to your model was not an Input tensor, it was generated by layer reshape_8.
Note that input tensors are instantiated via `tensor = keras.layers.Input(shape)`.
The tensor that caused the issue was: reshape_8/Reshape:0
You can use numpy.expand_dims method to convert the shape to 3D.
import numpy as np
np.expand_dims(realInput,axis=0)
Reshape layer keras
https://keras.io/layers/core/#reshape
Use the third parameter as 1
# Something Similar to this
X_train = np.reshape(X_train,(X_train.shape[0],X_train.shape[1],1))
Edit: Added np.reshape method
Refer this repository: https://github.com/NilanshBansal/Stock_Price_Prediction/blob/master/Stock_Price_Prediction_20_days_later_4_LSTM.ipynb
As I said before in the comments. You will need to make sure to reshape your data to match what LSTM expects to receive and also make sure the input_shape is correctly set.
I found this post quite helpful when I struggled with inputting to an LSTM layer. I hope it helps you too : Reshape input for LSTM
Related
I am fairly new to TF, Keras and ML in general.
I am trying to implement a very simple MLP with an input shape of (batch_size,3,2) and an output shape of (batch_size,3), that is (if I got it right): for every 3x2 feature, there is a corresponding 3 value array label.
Here is how I create the model:
model = tf.keras.Sequential([
tf.keras.layers.Dense(50,tf.keras.activations.relu,input_shape=((3,2)),
tf.keras.layers.Dense(3)
])
and these are the X and y shapes:
X_train.shape,y_train.shape
TensorShape([64,3,2]),TensorShape([64,3])
On model.fit I am facing a weird error I cannot understand:
ValueError: Dimensions must be equal, but are 3 and 32 for ... with input shapes: [32,3,3] and [32,3]
I have no clue what's going on, I understand the batch size is 32, but where does that [32,3,3] comes from?
Moreover, if from the original 64, I lower the number (shapes) of X_train and y_train, say, to: (19,3,2) and (19,3), I get the following error instead:
InvalidArgumentError: required broadcastable shapes at loc(unknown)
What's even more weird for me is that if I specify a single unit for the output (last) layer, instead of 3 like this:
model = tf.keras.Sequential([
tf.keras.layers.Dense(50,tf.keras.activations.relu,input_shape=((3,2)),
tf.keras.layers.Dense(1)
])
model.fit works, but the predictions have shape (1,3,1) instead of my expected (3,)
I am very confused.
Whenever you have not any idea about the journey of data throughout your model, use model.summary() to see the details and what happens to the shape of data in each layer.
In this case, the input is a 2D array, and the output is a 1D array, and you just used dense layers. Dense layers can not handle 2d features in nature. For example for an image as input, you can not feed it directly to a dense layer. Instead you should use other layers such as Conv2D or Flatten your input (make it 1D) before feeding your data to the dense layer. Otherwise you will get the other dimension in the output.
Inference: If your input dimension and output dimension differs, somewhere in your model, the shape need to be changed. Most common ways to do so, is using a Flatten layer or GlobalAveragePooling and so on.
When you pass an input to a dense layer, the input should be flattened first. There are 2 ways to deal with this:
Way 1: Adding a flatten input as a first layer of your model:
model = Sequential()
model.add(Flatten(input_shape=(3,2)))
model.add(Dense(50, 'relu'))
model.add(Dense(3))
Way 2: Converting the 2D array to 1D before passing the inputs to your model:
X_train = tf.reshape(X_train, shape=([6]))
or
X_train = tf.reshape(X_train, shape=((6,)))
Then change the input shape of the first layer as:
model.add(Dense(50, 'relu', input_shape=(6,))
I'm using tf.data.experimental.make_csv_dataset to create a dataset from a .csv file. I'm also using tf.keras.layers.DenseFeatures as an input layer of my model.
I'm struggling to create a DenseFeatures layer properly so that it is compatible with my dataset in the case when batch_size parameter of make_csv_dataset is not equal to 1 (in case if batch_size=1 my setup works as expected).
I create DenseFeatures layer using a list of tf.feature_column.numeric_column elements with shape=(my_batch_size,), but it seems like in this case for some reason the input layer expects [my_batch_size,my_batch_size] shape instead of [my_batch_size,1].
With my_batch_size=19 I'm getting the following error when trying to fit the model:
ValueError: Cannot reshape a tensor with 19 elements to shape [19,19] (361 elements) for 'MyModel/Input/MyColumn1/Reshape' (op: 'Reshape') with input shapes: [19,1], [2] and with input
tensors computed as partial shapes: input[1] = [19,19].
If I don't specify shape when creating numeric_column it doesn't work either. I'm getting the following error:
tensorflow.python.framework.errors_impl.InvalidArgumentError: The second input must be a scalar, but it has shape [19]
which assumes that numeric_column expects a scalar but recieves the whole batch in one Tensor.
How do I create an input layer of DenseFeatures so that it accepts the dataset produced by make_csv_dataset(batch_size=my_batch_size)?
From the tf.feature_column.numeric_column documentation:
shape: An iterable of integers specifies the shape of the Tensor. An integer can be given which means a single dimension Tensor with given width. The Tensor representing the column will have the shape of [batch_size] + shape.
This means that you must not pass the batch size to the shape argument: shape=().
Currently, with a batch size of 1, you get shape=(1,) that TF can handle thanks to broadcasting or something like that (dimensions of size 1 are easily added by TF if necessary), that's why it works.
Hope this can help. Provide more code if you want more help.
I have a model with conv1d as the first layer.
My data is time series data where each sample consists of 41 time steps where each time step has 4 features.
I have about 1000 samples.
I have specified the input shape of the conve1d layer to be (41,4) as it supposed to be.
However, I keep getting the following error: Input 0 is incompatible with layer conv1d_48: expected ndim=3, found ndim=2.
I suspect that the problem is that the shape of X is (1000,) while the shape of X[0] is (41,4). Has anyone encountered this problem?
Thanks.
l1=Input(shape=(41,4))
x=Conv1D(64,(4))(l1)
x=GlobalMaxPooling1D()(x)
x=Dense(1)(x)
model=Model(l1,x)
model.compile('rmsprop','binary_crossentropy',metrics=['acc'])
model.fit(X,y,32,10)
You defined an expected input on your Conv1D to be be 2D -> (41, 4)
But you give to it an input of shape (41,), be consistant in your definitions !
If you specify the input_shape in your Conv1D layer, you don't need to feed an Input layer to it.
Or you can change the shape of this Input layer to be consistant with this input_shape.
I am trying to predict() the output for a single data point d, using my trained Keras model loaded from a file. But I get a ValueError If predicting from data tensors, you should specify the 'step' argument. What does that mean?
I tried setting step=1, but then I get a different error ValueError: Cannot feed value of shape () for Tensor u'input_1:0', which has shape '(?, 600)'.
Here is my code:
d = np.concatenate((hidden[p[i]], hidden[x[i]])).resize((1,600))
hidden[p[i]] = autoencoder.predict(d,steps=)
The model is expecting (?,600) as input. I have concatenated two numpy arrays of shape (300,) each to get (600,), which is resized to (1,600). This (1,600) is my input to predict().
In my case, the input to predict was None (because I had a bug in another part of the code).
In official doc, steps refer to the total number of steps before stopping. So steps=1 means make predictions on one batch instead of making prediction on one record (single data point).
https://keras.io/models/sequential/
-> Define value of steps argument,
d = np.concatenate((hidden[p[i]],
hidden[x[i]])).resize((1,600))
hidden[p[i]] = autoencoder.predict(d,steps=1)
If you are using a test data generator, it is good practice to define the steps, as mentioned in the documentation.
If you are predicting a single instance, no need to define the steps. Just make sure the argument (i.e. instance 'd') is not None, otherwise that error will show up. Some reshaping may also be necessary.
in my case i got the same error, i just reshaped the data to predict with numpy function reshape() to the shape of the data originally used to train the model.
I want to feed a sparse tensor into a dense layer
inputs1 = tf.sparse_placeholder(tf.float32, shape=[None, 500], name='input1')
model1 = tf.layers.dense(inputs=inputs1, units=128, name='dense1')
When I execute this I get the following error
ValueError: The last dimension of the inputs to `Dense` should be defined. Found `None`
If I change sparse_placeholder to regular place_holder I don't get this error.
I recommend you use FeatureColumn when you try to do this. First create a column representing your sparse tensor, then build an input layer. Finally, feed this input layer to your dense layer. This will help your code make your intention clear; do you want this to be a one-hot tensor? do you want embeddings? etc.