I have installed SQL Server 2012 on my Windows 10 computer. When I try to access Reporting Services via the Browser such as Chrome or Firefox, It prompts me for username/password (In which I do enter) but then it gives me an error
(Reporting Services Error: The permissions granted to user
'ComputerName\User' are insufficient for performing this operation.
(rsAccessDenied)).
I have tried many solutions such as Internet Options and SQL server management studio. I have spent most of my time trying to figure this out but have given up hope.
Assuming you are trying to access Report Manager application (and not the Report Server) try this:
Run Internet Explorer as Administrator
Browse to Report Manager URL e.g. http://localhost/reports
You should see the Report Manager "home" page
Go to the Security settings for the home page and explicitly add your user account with the "Content Manager" role
You should now be able to browse to the home page with IE or Firefox. Note that Chrome is not a supported browser for SSRS 2012.
I struggled doing this with IE now officially unsupported (with chromium edge installed). Everytime I opened IE it would close immediately. To get around this, create a Windows Shortcut (lnk) file with this command:
"C:\Program Files\Internet Explorer\iexplore.exe" -extoff http://localhost/Reports
NOTE: The shortcut must be opened as Administrator.
Related
I have been building some new reports and hosting them in our SQL Server 2017 db and the current version of SSRS. However I am having an issue when running them from a laptop in Chrome in that they start to run and take a long time to complete. But if I run the same report in MS report builder from the same laptop it runs fine. It also runs fine in IE 11 and also in Chrome if I open it in an Incognito window. In case it is relevant the report has 3 parameters a Start and End date and a multi value parameter for the products we sell. Also the report uses a saved database account to connect to the datasource rather than needing to try and pass through the users network credentials.
If I open it on my Admin Terminal server it completely fine in Chrome without needing to do anything like use incognito mode. I even wondered if it was down to me being logged into a Google account in Chrome on my laptop but not being logged into one on the Terminal Server. But after logging into the same Google account on the terminal server the report still runs fine.
The authentication seems to be work fine as I can get onto the report portal without the need to manually enter my credentials and I can also navigate around the folders and reports and administer permissions and create subscriptions etc.
I have to test a product on Internet Explorer but when I try to start it always Edge browser is opened. I tried to set IE as default browser but did not help. I try to set Chrome or Firefox as default but also not help. I tried to uninstall then reinstall IE component from 'Uninstall programs - Turns windows feature on or off' but also did not help.
I have upgraded my Windows to Version 1909 x64 but also before this update the problem existed. I am using a Dell Latitude E5470 laptop. I also search the IE and Edge group policy settings but I don't find anything which help solving this problem.
Your suggestions, ideas and help would be very appreciated.
Thanks.
For me, I was able to fix the behavior by searching for "Internet Explorer Compatibility" in the Edge settings panel. Then setting the "Open Sites in Edge" setting to "Never."
I have had a similar behavior in Windows 10 20H2 (As of writing this answer, the latest Windows 10 build so far). I had a scheduled task which opens a website at a given time, the command there is:
"C:\Program Files\Internet Explorer\iexplore.exe" https://some.webiste.com
After upgrading to 20H2 it always opened in Edge, also manually browsing to that website was redirected to Edge.
I found a setting in Internet Explorer under Internet Options -> Advanced Tab -> Browsing section -> Uncheck Enable third party extensions.
Note: This might need a restart to take effect and disable also other extensions but unfortunately as of this day there seems to be no other options to browse a website in IE which needs IE for one or the other reason.
Edit:
This behavior I was experiencing seems to be a DLL (ie_to_edge_bho.dll) file which comes with Edge and is being installed in IE. There is a static list of websites which get automatically redirected to Edge. Disabling this extension is greyed out and not supported out of the box, other than disabling all extensions via the option described above.
This setting lets you decide whether to open all sites not included in the Enterprise Mode Site List in Microsoft Edge. If you use this setting, you must also turn on the Administrative Templates\Windows Components\Internet Explorer\Use the Enterprise Mode IE website list policy setting and you must include at least one site in the Enterprise Mode Site List.
Enabling this setting automatically opens all sites not included in the Enterprise Mode Site List in Microsoft Edge.
Disabling, or not configuring this setting, opens all sites based on the currently active browser.
Note: If you've also enabled the Administrative Templates\Windows Components\Microsoft Edge\Send all intranet sites to Internet Explorer 11 policy setting, then all intranet sites will continue to open in Internet Explorer 11.
https://admx.help/?Category=Windows_10_2016&Policy=Microsoft.Policies.InternetExplorer::RestrictInternetExplorer
The problem was with 20H2(Microsoft Windows 10 Enterprise ver 10.0.19042) when I received the same complaint from multiple users.
So this has been sorted out using below registry fix as mentioned by #alpar
Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Internet Explorer\Main\EnterpriseMode and set RestrictIE value from 1 to 0
For me, the correct answer was the one provided by #josibu.
I was trying to use the performance profiler in Visual Studio 2019 for a Web project. For this function, there is no way to convince Visual Studio 2019 to use anything other than Internet Explorer. Even on Windows 11, it tries to run iexplore.exe when no such program exists. For those machines that do have Internet Explorer installed, but crippled by Microsoft, disable third party extension, as directed by #josibu.
You may get a message that the setting will not take effect until you restart your system. In my case, this was not needed. The change worked after I simply closed Internet Explorer.
We have developed an office add-in. Its working fine with every other system except one. In that particular system when we try to load the app, it fails with a generic error (This app could not be started. Close this dialog to ignore the problem or click "Restart" to try again.). Event viewer has the following details
The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID
{9BA05972-F6A8-11CF-A442-00A0C90A8F39}
and APPID
{9BA05972-F6A8-11CF-A442-00A0C90A8F39}
to the user STC\inmchandr SID (S-1-5-21-2779513660-4158667818-3257731910-104078) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool.
The specified CLSID points to ShellWindows component, which is running with "Interactive User" account. I am unable to change the other security permissions like launching permissions for that component in DCom config. I tried to change the permission for the corresponding registry entry (as suggested in this link) But, nothing worked out.
The winword.exe is running as the same user who logged in. This system and the other systems (where it is working) are in the same network and I tried running gpupdate as well.
(In that problematic system) The same app is loading when we tried to run Word as administrator. The URL used for that taskpane app is launching without any issues from browsers
OS: Windows 8.1
Processor: 64 bit
Office: 2013
Could anyone help us out to resolve the issue?
I am trying to config a sharepoint 2010 site for anonymous access. The tutorials I am following are:
http://live.visitmix.com/Videos
http://blog.drisgill.com/2009/11/sp2010-branding-tip-9-turn-on-anonymous.html
http://www.topsharepoint.com/enable-anonymous-access-in-sharepoint-2010
And a few youtube videos.
I am stuck fast in a certain point. When I am told in Central Admin to click "Site Actions > Site Settings > Application Management > Manage Applications > SharePoint - 80" I do this. My next step is to click "Authentication Providers".
In my system this option is 'Greyed out' and not selectable. I also try to click "Anonymous Policy". The options in this section are also not selectable.
Is there further config needed? Can anyone suggest a possible solution? or link an article with the solution? The mix videos leave this config out.
Thanks in advance
Here is the solution:
I went a different way and basically opened every option related to security / perms / anon.
I ended up from central administration clicking "Security > Specify Authentication Provider > Default"
I was then able to allow anon access. The correct options have appeared to the site collection administrator.
In case you're using Windows 8 ensure that the browser you're using for the update is running in admin mode.
Otherwise just open another instance by "Run as administrator".
Good luck!
Try using Internet Explorer.
I had the same problem when using Firefox 3.6.8, but not in IE 8.
Also don't forget to open Internet Explorer with elevated administrator privileges.
I logged on as the local administrator on the box and the button was enabled, but when I tried to save, it error'ed out.
I created a new web application, and successfully made it anon, and was then able to make the original one anon too - no more error.
The quickest thing to verify: when opening up Central Administration in IE, ensure that you run it 'as administrator'
If you do, then no items like the authentication provider options on the ribbon will be disabled.
I have a web site that I developed on Vista using Vb.net9. It makes a connection to Oracle. for the connection I use System.Data.OracleClient. It works fine on my machine, and our test server, but it does not work on the production server. We installed the Oracle Client 11 on the server. The error is System.Data.OracleClient requires Oracle client software version 8.1.7
We've tried, making a console app that opens the connection, connection runs fine, opens, displays a message and all is well there.
Then we make a simple web form, put it in the directory of the program, just a button, opens the connection, try..catch, grabs error, same error.
The console app was running under an Administrator, web site running under iwam. Is it possible that iwam has a different path?
I've run into this error dozens of times:
Cause
Security permissions were not properly set when the Oracle client was installed on Windows with NTFS. The result of this is that content of the ORACLE_HOME directory is not visible to Authenticated Users on the machine; this causes an error while the System.Data.OracleClient is communicating with the Oracle Connectivity software from ASP.NET using Authenticated User privileges.
Solution
To fix the problem you have to give the Authenticated Users group privilege to the Oracle Home directory.
Log on to Windows as a user with Administrator privileges.
Start Windows Explorer and navigate to the ORACLE_HOME folder.
Choose properties on the ORACLE_HOME folder.
Click the Security tab of the Properties window.
Click on Authenticated Users item in the Name list.
Un-check the Read and Execute box in the Permissions list under the Allow column.
Re-check the Read and Execute box under the Allow column.
Click the Advanced button and in the Permission Entries verify that Authenticated Users are listed with permission: Read & Execute, and Apply To: This folder, subfolders and files. If not, edit that line and make sure that Apply To drop-down box is set to This folder, subfolders and files. This should already be set properly but it is important that you verify it.
Click the OK button until you close out all of the security properties windows. The cursor may present the hour glass for a few seconds as it applies the permissions you just changed to all subfolders and files.
Reboot, to assure that the changes have taken effect.
Try your application again.
The author of this post (now deleted post) suggests checking your C:\Windows\System32 folder to make sure that the oci.dll exists there. Copying in the file from the Oracle home directory solved this problem for me.
Update 1: It is possible for different users to have different path. But its not the likely problem here. There is more chance that the user that the iwam user doesn't have permission to the oracle client directory.
Update 0: Its suppose to work. Check for environment variable ( That are needed to find the oracle client and tnsnames.ora ). Also, Maybe you have a 32/64 bit issues. Also, consider using the Oracle Data Provider for .NET ( search for odp.net)
Oracle Client version 11 cannot connect to 8i databases. You will need a client in version 10 at most.
When we first moved over to Vista with Oracle 10g, we experienced this issue when we installed the Oracle client on our Vista boxes, even when we were running with admin privileges during install.
Oracle brought out a new version of the 10g client (10.2.0.3) that was Vista compatible.
I do believe that this was after 11g was released, so it is possible that there is a 'Vista compatible' version for 11g also.
Why not use this: dotConnect for Oracle (formerly known as OraDirect .NET)?
It can be configured to not require an Oracle Client at all.
We have been using this in both Windows Services and ASP.NET Web Services and it works like a charm.
For me, the issue was some plugin in my Visual Studio started forcing my application into x64 64bit mode, so the Oracle driver wasn't being found as I had Oracle 32bit installed.
So if you are having this issue, try running Visual Studio in safemode (devenv /safemode).
I could find that it was looking in SYSWOW64 for the ic.dll file by using the ProcMon app by SysInternals/Microsoft.
Update: For me it was the Telerik JustTrace product that was causing the issue, it was probably hooking in and affecting the runtime version somehow to do tracing.
Update2: It's not just JustTrace causing an issue, JustMock is causing the same processor mode issue. JustMock is easier to fix though: Click JustMock-> Disable Profiler and then my web app's oracle driver runs in the correct CPU mode. This might be fixed by Telerik in the future.