I have a server running on my machine. I want to send a request to the server using different IP address to test a web application. I only have the machine on which the server is installed. I have been testing as a single user but now I would like to let the server think that the request is coming from a different ip address even though it is from the same machine. How can I do that?
Here are the 2 solutions that might be possible in your situation
1- To change the ip address :
Pick an ip from the free proxies here: http://www.freeproxylists.net/
And enter the info in firefox just like this page says:
http://www.wikihow.com/Enter-Proxy-Settings-in-Firefox
Note: You may pick a proxy with port 80.
Then you are good to go...
2- Or you might use a Virtual Machine installed on the same computer as the server and access the website right from it but beware not to use bridged connection.
Related
I am trying to setup a LAMP environment on my laptop with Ubuntu 18.04.
I have no experience real previous experience with this and all tutorials i find are just a step for step guide on how to setup, but none explain what you are exactly doing.
So I don't know why I am having this problem.
After installing all parts of LAMP I can access localhost, and I see the apache default page.
But if I try to go to my IPaddress, (the ipaddress I found with curl -4 icanhazip.com) the page loads for a while and then tells me this:
Firefox can’t establish a connection to the server at 213.127.26.xxx
So my question is am I using the right IPaddress and how can I make apache work from my IPaddress? Because phpmyadmin will not work on localhost.
The issue is likely that your local ports (i imagine your web server is running on port 80 or 8080) are not being forwarded through your router. Your router likely uses something called “NAT (network address translation)” to expose all of the internal IP addresses on your network through a single “public” IP address, in your case 213.x.x.x (you should never post this here unless you’re 100% positive your network is secure!). Your router needs to be configured to forward port 80 on 213.x.x.x to your machine’s “internal” ip address, likely something like “192.168.x.x” or “10.0.x.x”. A search for “port forwarding ” should help you out
Alternatively, ngrok is a nice free tool which you can use to expose your port on a public address. By running nginx http 80, it will provide you with a temporary url where you can reach your site (on a free plan, it will only provide you that url for one day, so you will need to re-run it)
First, you have to find out on which ports your server is running.
After that, you have to go into your router's settings and add port forwarding entries for these ports, to make sure that your router forwards the requests to the right device.
I currently have Apache running as part of XAMPP and I am able to run the PHP scripts by accessing them at 127.0.0.1/<program_name>.php but when I try to access them as <my_ip>/<program_name>.php I get no response.
Am I doing something incorrectly or does my configuration need fixing?
assuming you are trying to access from an external ip address you need to setup your router (port forwarding) to send web traffic to the LAN ip of your machine.
you also may need to disable various firewalls at various points in your network.
In short there is not enough information given to provide you a definitive answer.
I want to convert my pc to a web server. I installed centos server and apache server.
How I can make apache server public? I want to everyone access my web site on my pc via browser.
Thank you..
You have 2 ways, you can buy a domain and a static IP address for your computer (usually through the service provider) and configure your router and FW to allow access to the machine for port 80.
The other way is to use some sort of dynamic dns service like DynDNS to be able to bind a DNS to a dynamic IP address (you will need to run a daemon to update the account once in a while because your IP may change). The FW and router rules are still needed in this case as well.
After you do one of the these steps everyone should be able to access your apache server on your computer as long as it's on.
I created an AMP web application that was originally going to be served from a traditional 3rd party host.
As we finished up, the client decided to host it internally, on a server in their office network. The application is only meant to be available to staff members, but those staff members will often be off-site. I had no involvement in setting up their network, which uses at least one server running windows server 2003. The client machines I saw were XP.
I set up Apache, MySQL and PHP on the server 2003 machine, and installed the application. The application is built on the CodeIgniter framework, so I set the base_url to the internal IP (192.168...), and we tested from within the network. Everything worked fine.
Next, we asked their network guy to open port 80 for apache. I set the base_url to the external IP, and tested from my home (using the external IP as the web address), and it works fine.
However, when attempting to access the application using the external IP from within the network, they're unable to connect. I can reset the base_url to the network IP, and they can access it using the network IP, but then it the application fails when connecting externally (since the base_url, used throughout the application, is pointing to the internal IP).
It suppose I could let CodeIgniter determine the base_url (by leaving the variable as an empty string), but would rather figure out why the external IP fails in-network, and try to correct that.
The server we're using is not dedicated to the AMP stack (in fact, it has at least one other application broadcasting to the internet that must have been using IIS, as well as an FTP server used for office scanners), so I suppose there might be some conflicts there.
I know very little about windows networking. A quick search suggested this might be because of NAT, but didn't offer a work-around.
Their network guy has no suggestions, and said that everything should be fine.
Is it possible to have users inside the network access the Apache server using the external IP, and if so, what needs to happen to enable that?
TYIA
Your client's NAT router is configured to forward packets arriving on its external interface for its external IP with port 80 to the internal machine, port 80, after re-writing the source and destination IP addresses in the packets.
From within the network, attempts to connect to the external IP address will be routed to the default route on the machines, the router's internal interface. This interface is not configured to forward packets back into the network.
Configure the application to listen on all IP addresses. Make sure that the server knows that the clients know it under several hostnames -- the internal IP address and the external IP address.
You might be able to re-write the NAT firewall rules on the router to perform the port forwarding for the internal interface as well, but off-the-shell equipment common in homes and small businesses do not make this task easy. More expensive gear (or home-built *BSD/Linux router machines) can do this without much effort, but it would needlessly add traffic to the router.
This isn't Apache related, nor is it CI related. It's often impossible to reach the external IP address from within the network.
Frankly, I don't know exactly why that is. I do know that it's related to how NAT (Network Address Translation) works or at least how it's implemented.
For a detailed overview of why this is, you should ask this question on serverfault. If you're simply a programmer who has to deal with it, accept that NAT usually works only from inside to outside and outside to inside, but not inside to inside.
You already mentioned one of the solutions in your question - don't use base_url. You could also simply run the server on an external IP address (not your company IP, but let's say a datacenter or something).
Strange error with an Project using dojo:
if i call : http://localhost/project everything works like expected.
if i call : http://127.0.0.1/project everything works like expected.
if i call : http://192.168.2.1/project i get the following error (ONLY in IE6!):
"Bundle not found, locale.."
Any ideas?
Iam running Zend Server CE with PHP 5.2
if i add: 192.168.2.1 to "hosts" it works (windows)
Sounds like Zend server is performing some kind of virtual site support using the site name as a partial domain.
I can't say 100% if/how it is beacuse I don't use Zend, but I can explain the principle using Apache as an Example.
There are 3 ways in which a web site can be virtually hosted under a single web server application, this applies to most servers on the market today, Apache, IIS, nginx and many others.
It all boils down to one thing, giving one running server application instance the ability to host multiple individual websites.
The 3 methods of seperating sites are as follows:
By IP address : If you have multiple IP addresses (Usually -but not always beacuse you have multiple network interface cards) then you can tell your server application to listen to one IP for one site, another IP for another site and so on. If you browse to one IP you'll get one site, and likewise the other on the other IP.
By Port Number : If your using only one IP address, then you can bind to multiple port numbers, port 80 is generally the default for web servers, but by browsing to an address and pinning the port number on the end (http://mysite.com:99) you'll force the browser to use that port. You can then have multiple websites listening on different ports and select them manually at browse time as required.
By Host Name Header: This is by far the most common way of supporting multiple sites, all web servers that understand the HTTP/1.1 protocol have to obey a header field in the request that contains the host name, when a request comes in for EG: http://mysite,com/ then there will be an entry in the request header that looks like 'Host: mysite.com' the webserver can then use that to say, oh yes.. I know which one that is.. and it then selects and serves the correct website.
The problems start to arise however when you start to use IP addresses that generally cannot be resolved or have no DNS name, because the web server then doesn't know which hostname to tag it to.
As an example in Apache, if you set up a virtual host, then try to browse that server using just the IP address, you'll get the default server, which in many cases won't even be configured to respond correctly or display anything.
To compound this, going up to web application layer, many frameworks also do their own checks on hostnames and other variables passed to them by the web server, and many make decisions on how to operate based on this information.
If you've gotten to the default web application by IP address, then there's a high chance that the framework may get confused at being presented with an IP address as a host name.
As the OP noted, in many cases, you can add a name to your hosts file and use this as a poor man's DNS substitute, the file to modify can be found in the following locations:
c:\windows\system32\drivers\etc\ - on windows
and
/etc/
on Linux/Unix
The file is generally just called 'hosts' and is a plain text file. Adding a line like:
123.456.789.123 myserver
Will tie http://myserver/ to http://123.456.789.123/
If you can, and your doing a lot of web applications it may be worth setting up your own DNS server, most Linux distros will allow you to install 'Bind' and I do also believe there is a version available for windows too.
I'm not going to go into the pro's and cons of private DNS servers here, it's a whole other subject in itself, but if your likely to be doing a lot of additions to your hosts, then in the long run you'll find it a better option.